Industrial grade I/O board - 8 analog I/O configurable in CAN and/or RS485

©UniSwarm 2021 - UIO8AD
2021/10/23 UDS4001C 6
Pins Name Description
1 io00 Input / output 0
2 io01 Input / output 1
3 io02 Input / output 2
4 io03 Input / output 3
5 io04 Input / output 4
6 io05 Input / output 5
7 io06 Input / output 6
8 io07 Input / output 7
9 +5V out +5V output (500mA max.)
10 GND Ground
11 GND Ground, power in -
12 +V Power in +
Figure 1.4: J301 pins
Recommended connector references
Screw connection :
• Phoenix : MC 1,5/12-ST-3,5
Push-in spring connection :
• Phoenix : FK-MCP 1,5/12-ST-3,5
1.3.3 Leds
There are 9 leds on the board :
- The first one is a RGB leds that give the status of the board.
- The 8 others leds are blue and each one correspond to a channel. If the led is turned on, it means that the channel is
active.
D101: IO00
D102: IO01
D103: IO02
D104: IO03
D105: IO04
D109: IO05
D110: IO06
D111: IO07
D112: Communication status
Figure 1.5: UIO8AD leds