Datasheet

©UniSwarm 2021 - UMC1BDS32
2021/10/23 UDS1001C 5
The logic power supply is derived from this power input. Power bridge is not directly connected to this power supply
but a power switch driven by software.
Recommended connector references, screw connection :
• Phoenix
®
: MSTB 2,5/ 2-STF
Recommended connector references, Push-in spring connection :
• Phoenix
®
: FKCN 2,5/ 2-STF
1.2.2 Buses
Both buses (RS485 and CAN Fd) have 30 kV Electrostatic Discharge (ESD) protection and high quality filters for noisy
environment.
A full 500 V isolation is present between BUS-side and power-side to prevent damage and avoid noise to propagate
through the bus.
Dual RJ45 socket (J601/J602). Both ports are connected together, to daisy chain the bus without external Y cable or
adapter.
The speed of both buses can be set by software.
Connectors J601/J602 : CAN Fd / RS485
Figure 1.4: RJ45 pins
Recommended connector references
Standard straight RJ45 cable.