Installation Instructions

ManualsBrandsUnit Connection Technology ManualsElectronicsWeather Station

 Six for pressure

 Seven for sensor dew point

1.Time, Time/Week and Date. Press the CHANNEL/+ or MIN/MAX/- key to toggle

between time, time/week and date.

2.Indoor Temperature. Press the CHANNEL/+ or MIN/MAX/- key to toggle between

temperature and dew point

3.Rainfall. Press the CHANNEL/+ or MIN/MAX/- key to toggle between rate, 24h,

week, month and total.

To clear the total rain, press the CHANNEL/+ or MIN/MAX/- button until total rain is

displayed. The total rain will flash. Press and hold the SET button for five seconds until

total rain reads 0.0.

4.Outdoor Dew Point. Press the CHANNEL/+ or MIN/MAX/- key to toggle between AT

（Apparent Temperature) and dew point.

5.Wind Average. Press the CHANNEL/+ or MIN/MAX/- key to toggle between

current,2mins and 10 minutes.

6.Absolute Pressure and Relative Pressure. Press the CHANNEL/+ or MIN/MAX/- key

to toggle between absolute pressure and relative pressure.

7.Sensor Heat Index. Press the CHANNEL/+ or MIN/MAX/- key to toggle between

sensor heat index and dew point..

7.2 Set (Program) Mode

While in Normal Mode, press and hold the SET(MODE) key for at least three seconds to

enter the Set Mode. The first setting will begin flashing. You can press the SET(MODE)

key again to skip any step, as defined below.

Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold

the [+] key or [-] key for three seconds to increase/decrease rapidly.

Note: To exit the Set mode at any time, press the SNOOZE button of the display

console.

1. Time SYNC(default: ON).Press the SET key again to set the network time sync.

Press the [+] key or [-] key to switch between SYNC time ON and SYNC time OFF of

measure.

2. 12/24 Hour Format (default: 24h):.Press the SET(MODE) key again to adjust the

12/24 hour format setting (FMT). Press the [+] key or [-] key to change between 12

hour and 24 hour format.

3. Change Hour. press the SET(MODE) key again to set the hour. Press the [+] key or [-

]key to adjust the hour up or down. Note the PM icon is present during afternoon hours.

4. Change Minute. Press the SET(MODE) key again to set the minute. Press the [+] key

or [-] key to adjust the minute up or down.

5. Date Format (default: MM-DD): Press the SET(MODE) key again to enter the

day/month format mode. Press the [+] key to switch between MM-DD-YY, DD-MM-

YY.

6. Change Month. Press the SET(MODE) key again to set the calendar month. Press the

[+] key or [-] key to adjust the calendar month.

7. Change Day. Press the SET(MODE) key again to set the calendar day. Press the [+]

key or [-] key to adjust the calendar day.

8. Change Year. Press the SET(MODE) key again to set the calendar year. Press the [+]

key or [-] key to adjust the calendar year.

9. Max/Min Clearing (default: ON). Press the SET(MODE) key again to set the

max/min clearing mode (CLR). The Max/Min can be programmed to clear daily (at