Installation Instructions

mount in a well protected area, such as under an eve. Use a screw or nail (not included) to

affix the remote sensor to the wall, as shown in Figure 16.

Figure 16

6.Low Battery Icon

A low battery indicator icon is shown in the display window for thermo-hygrometer

sensor. When the low battery icon appears (the battery voltage is lower than 2.4V), replace

the batteries in the sensor with fresh batteries. Be sure to never mix old and new batteries,

and never mix battery types such as alkaline and lithium together.

A low battery indicator icon is shown in the display window for Integrated outdoor

transmitter. When the low battery icon appears (the battery voltage is lower than 3.6V),

replace the batteries in the sensor with fresh batteries. Be sure to never mix old and new

batteries, and never mix battery types such as alkaline and lithium together.

7.Console Operation

Note: The console has five keys for easy operation: MIN/MAX/-key, ALARM key,

SET/MODE key, CHANNEL/+ and SNOOZE key.

7.1 Quick Display Mode

Note: To exit the Quick Display Mode at any time, press the SNOOZE key of the

display console.

While in Normal Mode, press (do not hold) the SET/MODE key to enter the Quick

Display Mode as follows:

 once for time, time/week and date,

 twice for indoor temperature, dew point,

 three for rainfall.

 four for outdoor dew point temperature

 Five for wind average