User's Manual

Southern Hemispheres

Figure 13

5.2. Southern Hemispheres (SOU).

For Southern Hemisphere installations, ignore these(N, S, E, W) and face the solar panel

to the North (and in a sunny position) when installing the Integrated outdoor transmitter.

Step 1: Install the Integrated outdoor transmitter and face the solar panel North.

Step 2: Console operation is set to Southern Hemispheres ( SOU in the time area) in

Location division.

Note: Console has to be location division setting so that the directions on the sensor

are matching with your real location. Permanent wind direction error（read approximately

180º）will be introduced when the wind direction sensor is not positioned correctly during

installation.

Fasten the integrated transmitter to mounting pole brackets with foot-mounting, two ￠3

bolts and M3 nuts , as shown in Figure 14