User's Manual

Here are some sample commands:
Weather Report
Outdoor conditions
Indoor conditions
Yesterday’s weather
Conditions for October 15, 2017
Conditions for September 2017
Conditions for 2016
For more information and to enable this app, visit:
https://assistant.google.com/services/a/id/668e6f3369f27209/
14.2 Maintenance
14.2.1 Adding or Subtracting Multiple Sensors
If you add or subtract multiple wireless sensors, you will need to synchronize the sensors.
14.2.1.1Adding or Subtracting Sensors
A:Make sure each sensor is on a different channel and in sequence (1, 2, 3, ..8) before powering up. Insert the
batteries.
B:Place each sensor about 5 to 10 feet from the console.
C:Do not touch any buttons until synchronization is complete.
14.2.2 Multiple Sensor Features
Wunderground.com does not support multiple sensor channels. However, AmbientWeather.net does support
multiple channels. The AmbientWeather.net dashboard allows you to rename the sensor description, as shown in
Figure 35.
Figure 35
14.3 Register with WeatherCloud.net
Note: This is best done on a computer desktop or laptop.