Installation Manual Owner manual

PORTAL TI
Portal Installation Manual Rev C 44
Document #: PTL1001
Appendix D. Installing a Print Server
The print server option allows you to print reports from the Portal to a printer
connected to the local area network (LAN). The print server is pre-configured at
Unitec.
Note: You must purchase the USB print
cable separately.
Unitec has tested and recommends the following printers for this application:
• HP LaserJet 1200,
• HP LaserJet 2100 series,
• HP LaserJet 2200 series,
• HP LaserJet 3200,
• HP LaserJet 3300,
• HP LaserJet 4000 series,
• HP LaserJet 4100 series,
• HP LaserJet 4200 series,
• HP LaserJet 4300 series,
• HP LaserJet 5000 series,
• HP LaserJet 5100 series,
• HP LaserJet 8000 series,
• HP LaserJet 9000
• Brother HL5200 Series
Note: If you wish to use a different printer, make sure that it is compatible with the
printer driver HP PCL5 or greater.
Installation Procedures
1. Connect the USB cable from the printer to the USB port on the print server.
2. Connect one end of the Ethernet patch cable to the Ethernet port on the print
server.
3. Connect the other end of the Ethernet patch cable to the Unitec router.
4. Connect the AC adapter to the print server and plug it in.