Owner's Manual Instruction Manual

P O R T A L
Document Number: PTL1028
Document Title: Portal 3 Owners Manual
3.3.2 Operating Schedule
The Operating schedule allows you to automatically set an opening and closing time for your car wash.
The message that is displayed when the site is closed can be programmed on the User Interface Set-up
Page (described in section 3.3.7). Operating schedules can be configured to vary by day of the week. The
operating schedule is disabled by default.
3.3.3 Wash Dispensing
The wash dispensing page is used to assign and configure the wash packages that will be offered at the
Portal. Wash packages must be set-up through the Products page (section 3.2) before they can be
assigned to a Portal device profile. This feature will typically not be changed after installation, but there
are some features of a wash package that an owner may want to adjust including:
 Added Services Offered – Allows one or more additional services to be offered to the
purchaser of the wash package. The Added Services to be offered can vary by package. An
added service must be added to the device profile (per section 3.3.4) before it can be
assigned to a wash package.
 Token Dispensing – When enabled, one or more tokens will be dispensed with each
purchase (of the wash package).
 Wash Details Text – The wash details text is displayed under the Wash name inside the
wash selection button. Up to 7 lines of text (18 characters per line) can be added. The
wash selection button will be sized to fit the amount of text entered so the buttons can be
made larger by entering more lines of text.
3.3.4 Added Services Dispensing
The Added Services Dispensing page is used to select and configure the added services that will be offered
with one or more of the wash packages. Added services must be set-up through the Products page
(section 3.2) before they can be assigned to a Portal device profile. An added service can be configured to
dispense one or more tokens when purchased. This feature allows an operator to sell token packages as
an added option to the wash purchase.
3.3.5 Wash Interface
The Wash Interface Set-up page is used to configure the hardware interface between the Portal and the
wash controller. These settings should only be changed by your distributor.
3.3.6 Programming Hardware Devices
The Peripherals page is used to configure the various hardware devices in the Portal such as cash
acceptors and dispensers. These settings would typically not be changed after installation.