User guide

WASHPAY
Document Number: WP1001 4
3.2 Installing the NEMA Enclosure
If an office area is not available, the Site Controller can be located in the equipment
room. If this is the case, it is recommended that the optional NEMA enclosure be used
in this type of location. The NEMA enclosure may be bolted to the wall in the
equipment room. The NEMA enclosure is shipped with a mounting plate for the Site
Controller
Figure 3. NEMA Enclosure Dimensions
Table 1. NEMA Enclosure Specifications
NEMA Enclosure Specifications
Dimensions ” 13.60W x 15.36” H x 7.95” D
Weight (includes NEMA box,
mounting plate, and Site
Controller)
11.85 lbs
Power 115VAC, 60Hz
Enclosure Polycarbonate
1. Using the dimensions shown in Figure 3, determine where to mount the NEMA
enclosure. Make sure the mounting location is a solid surface.
2. Plan cabling to the NEMA box and drill holes with a hole saw in the bottom of the NEMA
enclosure to route the cabling to the Site Controller.
Document Name: WashPay Site Controller Installation Manual