User's Manual
Table Of Contents
- Preface
- About This Manual
- Table of Contents
- Chapter 1
- Getting Started
- Chapter 2
- Using the Keypad and Scanner
- Chapter 3
- Power system
- Chapter 4
- Data Communication
- Chapter 5
- Useful Utilities
- Chapter 6
- Device Setting
- Appendix
- Worldwide Support
21
Cradle
USB Cradle
For data transmission, plug one end of
your HT660e's USB communication cable
into your PC's USB Port and the other end
into the HT660e Cradle's USB port. To
simultaneously charge the HT660e, plug
the AC power adaptor into the power
receptacle on the Cradle.
Ethernet Cradle
For data transmission, plug telephone line to the RJ45 port of your HT660e
cradle. To simultaneously charge the HT660e, plug the AC power adaptor into
the power jack on the cradle.
Using ActiveSync
Using Microsoft ActiveSync, you can synchronize and transfer information
between your desktop computer and terminal. The most current version of
ActiveSync can be downloaded from www.microsoft.com.
Additional Capabilities
With ActiveSync, you can also:
Back up and restore your device data.
Copy (rather than synchronize) files between your device and desktop
computer.
Control when synchronization occurs by selecting a synchronization
mode. For example, you can synchronize continually while connected to
your desktop computer or only when you choose the synchronize
command.
Select which information types are synchronized and control how much
data is synchronized. For example, you can choose how many weeks of
past appointments you want synchronized.
Before beginning installation, carefully read the following:
Because you will be restarting your computer during installation, save your
work and quit all programs before you begin.
To set up your communication settings, the HT660e serial cable is