User's Manual

36
Chapter 5
Useful Utilities
Introduction
Unitech has been developing some of useful utilities for user’s application. The
followings are Unitech Utilities introduction.
Scanner Setting
When it is necessary for the user to change the
default barcode symbology for a different application,
Scanner Control Panel provides the setting function
to change default symbology, place delimiter
characters behind scanned data, and save the
settings. Run this program from \Start\Setting\Control
Panel\Scanner Setting.exe and Scanner Control
Panel will be displayed.
Barcode Symbologies
Barcode
Symbology
Enable/
Disable
Char Check /
Digit verification
Transmit
Check
Char/digit
Leading
Digit
Transmit
Others
Bookland
EAN
YES
Codabar YES YES YES Transmit
Start/Stop bits,
CLSI format, *data
length
Code 11 YES YES * check digits,
*data length
Code 128 YES *data length
Code 32 YES Transmit Tailing
digit
Code 39 YES YES For ASCII,