User's Manual

Extended Keypad Keystroke

7016 Down Arrow

7017 Left Arrow

7018 Right Arrow

RS-232 Interface

This chapter describes how to set up the digital scanner with an RS-232 host. Use

the RS-232 interface to connect the digital scanner to point-of-sale devices, host

computers, or other devices with an available RS-232 port (e.g., com port).

Connecting an RS232 Interface

Connect the digital scanner directly to the host computer.

Note:

Interface cables vary depending on configuration. The connectors illustrated in above are

examples only. The connectors may be different than those illustrated, but the steps to

connect the digital scanner are the same.

1. Attach the modular connector of the RS-232 interface cable to the cable

interface port on the digital scanner.

2. Connect the other end of the RS-232 interface cable to the serial port on the

host.

3. Connect the power supply to the serial connector end of the RS-232 interface

cable. Plug the power supply into an appropriate outlet.

4. Select the RS-232 host type by scanning the appropriate barcode from RS-232

Host Types.

5. To modify any other parameter options, scan the appropriate barcodes in this

chapter.