User's Manual

Set Lengths for Code 11

Parameter # L1 = 0x1C, L2 = 0x1D

The length of a code refers to the number of characters (i.e., human readable

characters), including check digit(s) the code contains. Set lengths for Code 11

to any length, one or two discrete lengths, or lengths within a specific range.

• One Discrete Length - Select this option to decode only Code 11

symbols containing a selected length. Select the length using the

numeric bar codes beginning on page 77. For example, to decode

only Code 11 symbols with 14 characters, scan Code 11 - One

Discrete Length, then scan 1 followed by 4. To correct an error or to

change the selection, scan Cancel on page 78.

• Two Discrete Lengths - Select this option to decode only Code 11

symbols containing either of two selected lengths. Select lengths

using the numeric bar codes beginning on page 77. For example, to

decode only those Code 11 symbols containing either 2 or 14

characters, select Code 11 - Two Discrete Lengths, then scan 0, 2,

1, and then 4. To correct an error or to change the selection, scan

Cancel on page 78.

• Length Within Range - Select this option to decode a Code 11

symbol with a specific length range. Select lengths using numeric bar

codes beginning on page 77. For example, to decode Code 11

symbols containing between 4 and 12 characters, first scan Code 11

- Length Within Range. Then scan 0, 4, 1, and 2 (single digit

numbers must always be preceded by a leading zero). To correct an

error or change the selection, scan Cancel on page 78.

• Any Length - Scan this option to decode Code 11 symbols containing

any number of characters within the scan engine capability.