User's Manual
Table Of Contents
- RADEON™ 8500/ RADEON 7500™ User’s Guide
- Documentation Updates
- Multiple Monitors
- Connecting your RADEON 8500/RADEON 7500 to your monitors
- RADEON 8500/RADEON 7500 Display Configurations
- Multiple Monitor Controls
- Dynamic Monitor Reassignment Windows® 98SE/Windows®Me/Windows® NT4.0/Windows®2000
- Desktop Management Controls
- Hot Keys Controls
- MultiDesk
- Desktop Management Controls
- Hot Keys Controls
- MultiDesk
- OpenGL Display Properties
- Direct 3D Display Properties
- Color Properties
- Using TV Out
- View your PC’s display on a TV!
- Connecting your RADEON 8500/RADEON 7500 to a TV or a VCR
- Using and Adjusting TV Out
- Enabling and Disabling the Television Display
- 1 Click Start.
- 2 Point to Settings, then click Control Panel.
- 3 Double-click Display.
- 4 Click on the Settings tab and then the Advanced... button.
- 5 Click on the ATI Displays tab.
- 6 Click on the green enable/disable button next to the word “TV” to enable/disable television dis...
- 7 Click Apply to save the changes you have made.
- Starting Windows® with Television Display Enabled
- Using a Monitor vs. Using the Television Display
- Adjusting Monitor Display
- Viewing Text on Television
- To Use Larger Display Fonts
- 1 Click Start.
- 2 Point to Settings, then click Control Panel.
- 3 Double-click Display.
- 4 Click on the Settings tab and then the Advanced... button.
- 5 Make sure you’re on the General tab.
- 6 In the Font Size box, select the size you want your displayed fonts to be.
- 7 Click Apply, then follow the onscreen instructions to save your new settings.
- To Use Larger Display Fonts
- Reducing Edge Distortion
- To Increase the Horizontal Size
- 1 Click Start.
- 2 Point to Settings, then click Control Panel.
- 3 Double-click Display.
- 4 Click on the Settings tab and then the Advanced... button.
- 5 Click on the ATI Displays tab.
- 6 Click on the TV button.
- 7 Make sure you’re on the Adjustments tab.
- 8 Click on the plus (+) button under Horizontal Screen to increase the horizontal size of the tel...
- 9 Click Apply to save the changes you have made.
- To Change the Brightness
- 1 Click Start.
- 2 Point to Settings, then click Control Panel.
- 3 Double-click Display.
- 4 Click on the Settings tab and then the Advanced... button.
- 5 Click on the ATI Displays tab.
- 6 Click on the TV button.
- 7 Drag the Brightness slider to the left to decrease the brightness.
- 8 Click Apply to save the changes you have made.
- To Increase the Horizontal Size
- Changing Display Configurations
- Using Games and Applications
- Enabling and Disabling the Television Display
45
FCC Compliance Statements
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures :
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning : Modifications not expressly approved by the manufacturer could
void the user’s authority to operated the equipment under FCC rules.