User's Manual

Table Of Contents

Chapter 1 Getting Started

Charging the Battery

Before using the terminal for the first time, you need to charge it for about 16 hours.

After that, you can charge the terminal for 4 hours to recharge the battery to full

capacity. Charge the terminal using the USB charging cable or the docking station.

CAUTION! Operating the terminal for the first time without the AC adapter, and

without fully charging the backup battery may result in loss of data

stored in RAM memory. When the main battery is removed, the

backup battery retains RAM data in memory for 8 hours. Please

charge the battery for the period to avoid data loss in RAM memory.

NOTE: Turn the backup battery switch on before charging the battery. Data you

entered may not be properly stored until the built-in backup battery has

been fully charged.

Charging the battery with USB charging cable

1. Press and hold the release button on both sides of the USB charging cable and

connect it to PA968 (1).

2. Plug the AC adapter cable into the power jack of the USB charging cable (2).

3. Plug the AC adapter cord into an electrical outlet (3).

Charging the battery with the cradle

1. Plug the AC adapter cable into the power jack of the cradle (1).

2. Plug the AC adapter cord into an electrical outlet (2).