User's Manual

Table Of Contents

Chapter 1 Getting Started

3. Slide the terminal into the cradle until it clicks into place.

4. The connection is secure when the bottom edge of the terminal is aligned with

the cradle, and the LED indicator on the terminal lights up red.

Checking the LED status

Checking the Battery Status

If the battery level becomes low in the course of normal use, a status icon appears on

the device screen indicating low or very low battery status. In both cases, perform an

Activesync operation to back up your data, then recharge your device as soon as

possible.

CAUTION! Once the device is shut down, you should recharge the device within

48 hours. Otherwise you will lose all data including files stored in the

RAM memory.

Connecting the terminal to a host (PC/ Notebook)

Use the USB charging cable to connect the PA968 to a PC/ Notebook in order to use

with Activesync.

NOTE: To avoid low battery situation while synchronizing, you should connect

the power supply.

1. Press and hold the release button on both sides of the USB charging cable and

connect it to PA968 (1).

LED Light Description

Terminal GPRS/GPS

Communication

Flashing Red GPRS/GPS power is on

Flashing Green Communicating

Engine reading Solid Red Reading

Solid Green Decoded

Power charging Solid Red Charging

Solid Green Fully charged

Cradle Power charging Solid Green Power is on

Communication Flashing Green Data synchronization is active

Terminal LED indicators

from left to right:

- GPRS/GPS Communication

- Engine reading

- Power charging

Cradle LED indicator