User's Manual

Chapter 2 Using the Hardware
16
5. Tap Match to carry out identification. “Please
sweep your finger!” message pops up.
Gently sweep the finger inwards on the reader
following on-screen instructions until a mes-
sage pops up saying “Matching Success!” or
“Matching Fail!”.
Using the Barcode Laser Scanner
PA968 has an integrated laser scanner which reads all major barcode labels with
excellent performance.
NOTE: The reading software must be enabled in order to operate the scanner.
This can be a user-loaded application or a pre-loaded utility such as
Scanner Settings and Scan2Key.
To launch the Scanner Control Panel, follow these instructions.
1. Tap Start → Settings, and then switch to Control Panel tab.
2. Tap the Scanner icon.
The Scanner Control Panel appears.
NOTE: Or press Func key and “7” button simul-
taneously to bring up the Scanner Con-
trol Panel screen.
In the Scanner Control Panel screen, you can configure barcode scanner parameters
such as enabling or disabling barcode symbologies, setting data transmission options,
configuring magnetic and proximity reading options, and setting power management
options. See Barcode Symbologies on page 32.
To test the barcode laser scanner, follow these instructions.
1. Tap the Test tab to activate the demo program.