User's Manual

Table Of Contents

Chapter 5 Advanced Settings

Method 1: From WinCE

1. Tap Start → Programs → Utilities → Boot-

mode.

The BootMode Screen appears.

2. Tap Cold Boot.

The system is reset and you will lose all data

including all files in the RAM memory.

Method 2: From Hardware

1. Remove the battery compartment cover

and the main battery. See Installing the

Battery on page 6.

2. Turn the backup battery switch off.

3. Turn the backup battery switch on.

4. Put the battery back into the battery com-

partment and replace the battery compart-

ment cover.

System will cold boot.

NOTE: When you perform hard reset, the

data and time settings will not be

retained. Formats, preferences, and

other settings are restored to their

default factory settings.