Quick Start Guide

Unitech is a registered trademark of Unitech Electronics Co., Ltd.

All product and company names are trademarks, service marks, or registered trademarks of their respective owners

Introducing the RM100 UHF RFID Reader Module

Unitech’s RM100 is a high-performance UHF RFID reader module based on the Impinj R2000

chip. It is compliant with EPC C1 Gen2 / ISO 18000-6C.

RM100 has one (Ipex) antenna connector. It also supports dense reader mode (DRM), anti-

collision, and Listen-Before-Talk (LBT) features. RM100 has a long operating distance of up

to 9 meters when its adjustable TX power is set to 33 dBm with a 4 dBi antenna.

RM100 is small (55 mmx 35 mm x 4.3 mm) and ideal for adding UHF RFID read/write

capabilities to a wide range of products and solutions, such as RFID handheld PDA, label

printers, and stationary readers.

RM100 uses Serial and USB interfaces to connect to an external processor board or PC host.

Features



Complaint with EPC C1 Gen2 / ISO 18000-6C



Supporting Dense Reader Mode (DRM) and Listen-Before-Talk (LBT) features



One (Ipex) antenna connector



Adjustable transmit output level control from 10 dBm to 33 dBm in 0.1 dB step



Maximum tag read rate of over 750 tags per second



Maximum tag read distance of 27 feet (9 m) with 4 dBi antenna