User's Manual

ManualsBrandsUnitech Electronics ManualsComputers & AccessoriesTABLET PC

TB160

10.1” Rugged Tablet Computer

Quick Start Guide

Version 1.0

Accessory

TB160

Power Adapter

Stylus

2-Point Carrying Handle

4-point Handstrap

For more detailed tablet computer setting, please go to www.ute.com to download the user manual and the

configuration manager utility.

Overview

1. Front camera

2. FN key

3. F1 key

4. F2 key

5. Touch screen

6. Barcode trigger

7. Battery LED

8. Wi-Fi LED

9. FN LED

10. Power LED

11. Power key

12. Volume –

13. Volume +

14. Home key

15. DC-IN jack

16. RS-232

17. Securing holes

18. Rear camera

19. Battery

20. Barcode reader

21. NFC sensing area

22. Expansion bay

23. Stylus holder

24. Kensington lock

25. Pass-through

26. Docking connector

27. USB 2.0

28. Micro-HDMI

29. MicroSD slot

30. Battery Switch

31. Micro SIM slot

32. USB 3.0

33. Audio jack

34. Ethernet

35. Tether hole

Note To prevent damage or malfunction,always dry the touch screen when wet .

2-Point Shoulder Strap

Hitch D-rings (Attaching straps)

Regulatory Compliance Statements

Quick start Guide

QR code card

Summary of content (3 pages)

PAGE 1
TB160 10.1” Rugged Tablet Computer Quick Start Guide Accessory TB160 Power Adapter Stylus 2-Point Carrying Handle 4-point Handstrap 2-Point Shoulder Strap Hitch D-rings (Attaching straps) Regulatory Compliance Statements Quick start Guide QR code card Overview 1. 2. 3. 4. 5. 6. 7. 8. Note Front camera FN key F1 key F2 key Touch screen Barcode trigger Battery LED Wi-Fi LED 9. 10. 11. 12. 13. 14. 15. 16. FN LED Power LED Power key Volume – Volume + Home key DC-IN jack RS-232 27. 28. 29. 30. 31.
PAGE 2
TB160 10.1” Rugged Tablet Computer Quick Start Guide Charging 1. 2. Flip open the DC-IN cover to expose the DC-IN jack. Connect the AC adapter to the DC-IN port. 3. 4. 5. After charging,disconnect the AC adapter. Replace th DC-IN cover by angling the rear side at an angle. Press the front open end down in the compartment to seal in place. 1. 2. 3. Open th I/O compartment cover. Switch the DIP switch to the ON position. Install the external battery cover over the battery connector. 4.
PAGE 3
: 401173G : : A4 (105mm*148mm) : +/- 0.