User's Manual

unitech is a registered trademark of unitech Electronics Co., Ltd.

All product and company names are trademarks, service marks, or registered trademarks of their respective owners

WD200 User’s Manual

● Power Save Mode

Tap to enable the power save mode to set the WLAN module to its optimum

power consumption setting.

● Roaming Trigger

(Default : -67 dBm, Range : -10 dBm ~ - 120 dBm)

Roaming trigger will help users to look for a better and stronger signal

strength (in dBm) by scanning many access points. When the signal

strength is lower than roaming trigger value, roaming trigger will start to

look for better access points.

● Roaming Delta

( Default : 5 dB, Range : 0 dB ~ 30 dB)

Based on roaming delta value, the device will roam to a better signal

strength access point.

● Roaming Scan Period

(Default : 0 sec, Range : 0 sec ~ 60 sec)

The device will stay with the current AP based on the roam period value

before it roams to a different AP.