User`s manual

17
Quick Setup
Appendix A has a quick setup chart, which gives you one label or one
function convenience to the scanner. To setup the scanner, locate the label
with the function you want and scan that label.
Batch Setup
If you need to configure more than one scanner, you may duplicate the settings
of the scanner (master) to the others. You can do this by producing a set of
custom setup labels derived from the master scanner and scanning these
labels configuring the other scanners.
The following label is called "Dump Settings" label. Before you scan the label,
please open a text editor application (such like, Notepad, Word, etc.)
Scan the following label, the settings of the scanner will dump to the screen
as one or several ASCII string(s). Use any barcode printing software, select 39
symbology, and use the string(s) to generate bar code labels. You use this
batch setup labels to duplicate setting to the other scanners.
Dump Settings
EXAMPLE:
1. PR OJECT ASSIGNMENTS:
1.1 Beep tone: BEEP LOW – HIGH
1.2 Capslock Mode: CAPSLOCK ON (FIXED)
1.3 Reading Mode: CONTINUOUS AUTO OFF
2. SETTING PROCEDURE:
2.1 Scan BEEP LOW. - -HIGH (GROUP 3)
2.2 Scan CAPSLOCK ON (FIXED) (GROUP 3)
2.3 Scan CONTINUOUS AUTO OFF (GROUP 2)