Spec Sheet
Print Mechanism
Printing method Direct thermal
Print resolution 203dpi/8 dots mm
Printing width 2.83”
Dots per line 576
Paper feed pitch 0.125mm
Printing speed Up to 2” per second
Operating voltage 5V
Current consumption 3.8A at 64 dots
Operating Characteristics
Memory 32K SRAM/256K + 32K Flash ROM
Character set ASCII International, PC Line Draw
Additional character sets Simplified Chinese, Hebrew, Arabic, Polish, Korean
Optional character sets Downloadable fixed-width fonts
Graphic print Supports 8-bit graphic printing, custom fonts,
logo downloading
Bar code symbologies Codes 39, Code128, UCC/EAN-128, Interleaved
2 of 5, UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13,
Codabar
Characters per line 36, 48, 57, 60, 64, 72, 96 (S/W command)
Print contrast Auto and user selectable
Print output Double high, double wide and bold print
Special print character attributes Double high, double wide and bold print
Communication
Standard interface RS232 and IrDA
Optional interface
Bluetooth V2.0
Baud rate 2400 – 38.4K
Security
Passkey (Bluetooth)
Field Environment
Operating temperature
14ºF – 122ºF (-10ºC – 50ºC)
Storage temperature -4ºF – 140ºF (-20ºC – 60ºC)
Charging temperature 32ºF – 122ºF (0ºC – 5ºC)
Drop Threshold 4’
Paper Specifications
Media type Thermal direct receipt paper; 0.4” roll core ID
Paper width 3.125”
Paper thickness 2.2 – 3.5 mils
Lines of print/roll 4400 (1.375” diameter roll, approx. 43’ long)
Paper rolls per charge 8
Lines per charge 35,000 (4” receipt followed by 60-second delay)
Battery and Power
Main battery 7.4V Li-Ion 2200mAh rechargeable battery pack
Battery life 80 percent of original capacity after 300 cycles
Battery life cycle 6-hours – 8-hours (configuration dependant)
Battery recharge 180-minutes (via charging cable or docking station)
DC power pack 100V – 250V AC input, 10V/1.4 A DC/AC; UL
listed adapter standard (in-printer charging)
In-Vehicle charger 12V/24V, cigarette lighter adapter
User Interface
Status indicators 3 LEDs – Power/Error, Charging, Ready/Fault
User switches 2 switches – Power On/Off, Feed
Connection & Expansion COM port; RJ type (6 pin); Magnetic card reader
(optional)
External Characterics
Dimensions 2.27”H x 5.01”W x 6.14”D
Weight 1.41 pounds (with battery and paper supply)
Regulatory Approvals
FCC
Part 15 Subpart B, Class B
CE
EN60950; EN55022 Class B; EN61000-3-2;
EN61000-3-3; EN50024
Warranty
Standard 1-year
Available 5-year
MP
300
MP300 AC Adapter Belt Clip Paper Roll
In the Box:
www.ute.com
Unitech America, Inc.
6182 Katella Avenue
Cypress, CA 90630
714-891-6400 ph
800-861-8648 toll
714-891-5050 fx
Specications subject to change without notice.
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or
registered trademarks of their respective owners.