Contents Setup Procedures …………… 2 Batch Setup …………… 3 Bar Code Setup Menu …………… 4 1 Device Selection and Default …………… 4 2 Beep and Delay …………… 6 3 Keyboard Wedge …………… 8 4 RS232 Serial Setting …. 10 5 Scanner ………….. 12 6 Data Format ………..… 14 7 Symbologies(I): Code 39/I2 of 5/ S2 of 5/Delta Distance Code/Code 32 ..
8 Symbologies(II): Code 128 / MSI / Code 93 / Codabar /Label Code ………….. 18 9 Symbologies(III): UPC/EAN ………….. 20 Function Code for PC .… 22 Function Code for MAC …. 24 Function Code for IBM Terminal ………..… 26 Full ASCII Table Test Chart ………….. 28 …………………... 34 Setup Procedures 1) Locate a group that contains the parameters to be changed. 2) Scan the “Enter Group” label. The Reader will sound 3 beeps to indicate that setup is in progress. 3) Scan the label representing the parameter to be changed.
5) Repeat the above two steps, if necessary, to change the parameters in the same group. 6) Scan the “Exit” label to end the group currently selected. The Reader will sound 2 beeps. 7) Repeat the procedure for other groups, if needed, which include the parameters to be changed. Batch Setup Having configured a scanner, you may duplicate the settings of the scanner (master) to the others.
Bar Code Setup Menu 1 Device Selection and Default Enter Group 1 Group Default 0 1 2 3 4 5 6 7 8 9 Factory Default Exit 4
Keyboard Wedge Reader Device Device Type ID 00 IBM PC/XT 01 IBM PC/AT, PS/2 mod 40, 60, 80 etc.
2 Beep and Delay Enter Group 2 Group Default 0 1 2 3 4 5 6 7 8 9 F5 (%VE) Exit 6
Beep Tone (On Decoding): 0 1 2 None Low Medium 3 4 5 A1 High Low to High High to Low 3 4 5 A2 High Low to High High to Low 3 4 5 A3 20 ms 50 ms 100 ms 3 4 5 A4 500 ms 1 second 5 seconds Beep Tone (On ACK): 0 1 2 None Low Medium Inter-Character Delay: 0 1 2 1 ms 5 ms 10 ms Inter-Block Delay: 0 1 2 10 ms 50 ms 100 ms 7
3 Keyboard Wedge Enter Group 3 Group Default 0 1 2 3 4 5 6 7 8 9 Review Exit 8
Function Code: B1 0 Off 1 On 1 B2 Upper Case Upper/Lower Case: 0 Lower Case Function Code: B3 0 1 2 3 4 5 6 7 8 9 US UK Swiss Swedish Spanish Norwegian Italian German French Alt Key Mode 9
4 RS232 Serial Setting Enter Group 4 Group Default 0 1 2 3 4 5 6 7 8 9 Review Exit 10
Baud Rate: C1 0 1 2 3 300 600 1200 2400 4 5 6 4800 9600 19200 3 4 C2 Space None Parity: 0 1 2 Even Odd Mark Data Bit: C3 0 7 1 8 BCC character: C4 0 Off 1 On 2 3 C5 10 seconds No limit Time Out: 0 1 1 second 3 seconds 11
5 Scanner Enter Group 5 Group Default 0 1 2 3 4 5 6 7 8 9 Review Exit 12
Double verification: 0 D1 1 Off On Label Type: 0 Positive D4 1 Positive and Negative Output of Wand: D5 0 1 Bar High / Space Low Bar Low / Space High Level Duration: 0 200 us 1 13 D6 600 us
6 Data Format Enter Group 6 0 Group Default 1 Review 2 Exit 3 Default Code ID Table SymSet1 Set2 bology UPC-A A A UPC-E E C EAN-13 F A EAN-8 FF B I 2 OF 5 I I S 2 OF 5 H H Code 39 M Y Codabar N N Code93 L L Code 128 K K MSI O M Code 11 J J If the “User Defined” option is selected, the default ID is Set1.
Terminator: 0 1 Enter (CR/LF) Field Exit(CR) 2 3 E1 Return(LF) None 2 3 E2 Default Set I Default Set II Code ID: 0 1 None User Defined Define Code ID: 00 01 02 03 04 05 06 Code 39 Full ASCII Code 39 Standard EAN-13 UPC-A EAN-8 UPC-E I 2 of 5 07 08 09 10 11 12 13 E3 Codabar Code128 Code 93 S 2 of 5 MSI Code 11 Data Length: 0 Exclude 1 E4 Include OO PP Postamble: Preamble: Scan “OO” to program preamble. Scan characters from Full ASCII table to define preamble. Maximum 16 characters.
7 Symbologies(I): Code 39/I2 of 5/ S2 of 5/Delta Distance Code/Code 32 Enter Group 7 Group Default 0 1 2 3 4 5 6 7 8 9 NN Maximum Length MM Minimum Length Review Exit Code 32: F5 0/1 2/3 4/5 Disable/Enable Leading Character Send / No Send Trailing Character Send /No Send 16
Code 39: F1 0/1 4 5 6 7/8 0~48 Disable/Enable 2/3 Full ASCII/Standard Check Digit Calculate and Send Check Digit Calculate but Not Send Check Digit Not Calculate Send/Not Send Start & Stop Min 0 / Max 48 Interleaved 2 of 5: 0/1 2/3 4 5 6 7 8 9 4~64 F2 Disable/Enable Fix Length On/Off (by first three reads) Check Digit Calculate and Send Check Digit Calculate but Not Send Check Digit Not Calculate First Digit Suppressed. Last Digit Not Suppressed. Not Suppressed.
8 Symbologies(II): Code 128 / MSI / Code 93 / Codabar /Label Code Enter Group 8 Group Default 0 1 2 3 4 5 6 7 8 9 NN Maximum Length MM Minimum Length Review Exit 18
Code 128 / Label Code: 0/1 Disable/Enable 1~64 MSI / Plessey Code: 0/1 4 5 6 1-16 G1 Min 1 / Max 64 G2 Disable/Enable 2/3 CD Send / No Send CD Double Module 10 CD Double Module 11 Plus 10 CD Module 10 or 11 Min 1 / Max 16 Code 93: G3 0/1 Disable/Enable 1~48 Min 1 / Max 48 Code 11: G4 2/3 One/Two CD 0/1 Disable/Enable 4/5 CD Send / No Send 1-48 Min 1 / Max 48 Codabar: G5 0/1 4 5 6 7/8 3-48 Disable/Enable 2/3 S & S Send / No Send CD Check & Send CD Check but not Send CD not Check CLSI Format On /
9 Symbologies(III): UPC/EAN Enter Group 9 Group Default 0 1 2 3 4 5 6 7 8 9 Review Exit 20
UPC-A: H1 0/1 2/3 4/5 Disable/Enable First Digit Send / No Send CD Send / No Send UPC-E: H2 0/1 2/3 4/5 6/7 Disable/Enable First Digit Send / No Send CD Send / No Send Zero Expansion On / Off EAN-13: H3 0/1 2/3 4/5 6/7 Disable/Enable First Digit Send / No Send CD Send / No Send ISBN Enable / Disable EAN-8: H4 0/1 2/3 4/5 Disable/Enable First Digit Send / No Send CD Send / No Send Supplement Code: H5 0/1 2/3 4 5 6/7 2 Add-on Code Off / On 5 Add-on Code Off / On Transmitted if Present Must Present.
Function Code for PC F1 (%VA) F2 (%VB) F3 (%VC) F4 (%VD) F5 (%VE) F6 (%VF) F7 (%VG) F8 (%VH) F9 (%VI) F10 (%VJ) F11 (%VK) F12 (%VL) Cursor Right (/FC) Cursor Left (/FD) Cursor Up (/FE) Cursor Down (/FF) PgUp (/FG) PgDn (/FH) TAB (/FI) Back Tab (/FJ) ESC (/FK) Enter (/FL) Right Ctrl (/FO) Right Enter(/FM) 22
Ins (/FW) Del (/FX) 23
Function Code for MAC F1 (%VA) F2 (%VB) F3 (%VC) F4 (%VD) F5 (%VE) F6 (%VF) F7 (%VG) F8 (%VH) F9 (%VI) F10 (%VJ) F11 (%VK) F12 (%VL) F13 (%VM) F14 (%VN) F15 (%VO) Cursor Left (/FD) Cursor Right (/FC) Cursor Down (/FF) Cursor Up (/FE) Page down (/FH) page up (/FG) ins (/FJ) Ttab (/FI) Enter (/FL) 24
Esc (/FK) return (/FM) Option Make (%VP) Option Break (%VQ) Control Make (%VR) Control Break (%VS) Shift Make (%VT) Shift Break (%VU) Apple Make (%VV) Apple Break (%VW) 25
Function Code for IBM Terminal F2 (%VB) F1 (%VA) F3 (%VC) F4 (%VD) F5 (%VE) F6 (%VF) F7 (%VG) F8 (%VH) F9 (%VI) F10 (%VJ) F11 (%VK) F12 (%VL) F13 (%VM) F14 (%VN) F15 (%VO) F16 (%VP) F17 (%VQ) F18 (%VR) F19 (%VS) F20 (%VT) F21 (%VU) F22 (%VV) F23 (%VW) F24 (%VX) 26
Home (/FA) End (/FB) TAB (/FI) Enter (/FL) Return (/FM) Field Exit (/FO) Field + (/FP) Field - (/FQ) RESET (/FV) 27
Full ASCII Table NUL (%U) SOH ($A) STX ($B) ETX ($C) EOT ($D) ENQ ($E) ACK ($F) BEL ($G) BS ($H) HT ($I) LF ($J) VT ($K) FF ($L) CR ($M) SO ($N) SI ($O) DLE ($P) DC1 ($Q) DC2 ($R) DC3 ($S) DC4 ($T) NAK ($U) SYN ($V) ETB ($W) 28
CAN ($X) EM ($Y) SUB ($Z) ESC (%A) FS (%B) GS (%C) RS (%D) US (%E) SP ! (/A) ” (/B) # (/C) $ % & (/F) ’ (/G) ( (/H) ) (/I) * (/J) + , (/L) - .
0 1 2 3 4 5 6 7 8 9 : (/Z) ; (%F) < (%G) = (%H) > (%I) ? (%J) @ (%V) A B C D E F G 30
H I J K L M N O P Q R S T U V W X Y Z [ (%K) \ (%L) ] (%M) ^ (%N) _ (%O) 31
` (%W) a (+A) b (+B) c (+C) d (+D) e (+E) f (+F) g (+G) h (+H) i (+I) j (+J) k (+K) l (+L) m (+M) n (+N) o (+O) p (+P) q (+Q) r (+R) s (+S) t (+T) u (+U) v (+V) w (+W) 32
x (+X) y (+Y) z (+Z) {(%P) | (%Q) } (%R) ~ (%S) DEL (%T) 33
Test Chart EAN-13 3 045214 834123 EAN-8 8012 3453 UPC-A 0 47669 13716 6 UPC-E 99 0 123457 2 ISBN 957-630-239-0 00270 9 789576 302398 34
W+ E + D + G + E Code 39 with C/D UNI T E C H- E Interleaved 2 of 5 0987654321 Codabar A2 2 3 5 7 0 0 0 5 9 9 8 7 6 B MSI 12345- 5 35
