User guide

Unitech Electronics Co., Ltd Created
by Yukiko
PA500 Operation
Manual
V2.0 Page 101 of 123
A2 Link your Bluetooth COM port in MS ActiveSync.(Make sure your
ActiveSync is at least version 4.1)
A2.1 Run MS ActiveSync. Under File, select “connection settings”. Check and
select the Bluetooth COM port. (In this case, COM4)
A3 Search your host on the terminal
A3.1 From PA500, under “Settings>Connections”, double tap “Bluetooth”.
A3.2 Under “Mode”, check “Turn on Bluetooth”.