System information

3-36
Beam
Tap >
Settings
>
Connections
tab >
Beam
.
By default your device detects incoming infrared (IR) and Bluetooth
beams and prompts you to accept them. If you do not want your device to
detect or receive beams, clear the
Receive all incoming beams
check
box.
If someone attempts to send you an IR beam from an older device,
you may not be prompted to accept it. In this case, before the beam is
sent from the other device, tap
Receive an infrared beam
at the
bottom of the Beam screen.
See Also:
Beaming Information
Receiving a Bluetooth Beam
Clock
Tap >
Settings
>
System
tab >
Clock
.

If you visit a particular time zone often, select it as your
Visiting
time
zone on the
Time
tab so that you can quickly see the correct date and
time.

You can use your device as a travel alarm clock by setting a wake-up
alarm on the
Alarms
tab. Tap the alarm icon to select the type of alarm
you want.

To change the way the date or time is displayed on your device, go to
Regional Settings.
The clock is displayed on the navigation bar. Tap the clock to see
today's date.