Scanner User Manual

30
Unitech PA962
Changing Communications Settings
If Microsoft ActiveSync fails to detect the PA962 during installation, set up commu-
nications manually instead. Make sure the following conditions are met:
To check communications settings,
open the Mobile Devices folder, and
click File => Connection Settings.
The baud rate on the PA962 is set to
57600bps by default. To adjust the
baud rate, tap Start, Settings, Con-
trol Panel, select the Communication
icon, select the PC Connection Tab,
and then tap the :Change
Connection….9 Button. For more
information, see Microsoft ActiveSync
Help.
=
Set your baud rate on the PA962 and desktop computer will match it.
=
Microsoft ActiveSync uses the specified communication ports to connect to
the PA962. Make sure these resources are available for Microsoft ActiveSync
to connect to the PA962. Other programs cannot use them while the PA962
and your desktop computer are connected.
=
Verify that the correct communications port is selected for your desktop
computer, and that it is free.
!$& '&)*+,$-./012& 10)& 3 5&&&&&&&&&&&www.pdffactory.com