PA970 QuickStart Guide * For the latest and most up-to-date information and downloads, please visit www.ute.com.
Laser Scanner IMPORTANT The PA970’s Backup Battery arrives to the customer switched off. Before charging the PA970, the Backup Battery must be switched ON in order to avoid accidental data loss. 17 The Unitech PA970 is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazerdous.
Power Status 13 Check Battery Status On the Main Screen click Power. Under the Battery tab you will see the status of the main and backup batteries with three types of indicators - “Good”, “Low”, and “Very Low”, with bold text indicating the actual status. GPRS, WLAN, and Bluetooth 14 Introduction 1 Unitech PA970 and Accessories Please make sure the following items are present: GPRS Setup 1. Under Program Files select GPRS. Click DialUpGPRS. Thank you for choosing Unitech’s PA970.
Charging the PA970 5 NOTE: The PA970’s Backup Battery arrives to the customer switched off. Before charging the PA970, the Backup Battery must be switched ON in order to avoid accidental data loss. Open the SD Compartment and flip the white switch toward the stylus slot. Initial Operation 6 Note: Your Unitech PA970 is shipped with a protective film covering the display.
