User`s manual

Chapter 5 Advance settings
23
Checking the Main and Backup Battery Status
This section describes how to view the power level for both the main and backup battery. To minimize
power consumption, you can define settings for the auto-off function and the processor’s operation
speed.
To check the main and backup battery status:
1. Tap Start → Settings → Control Panel → Power:
The Power Properties screen appears.
2. The battery menu item displays the status of the
main and backup batteries.
On the screen shown here, the main battery is good,
but the backup battery charge is very low. You
should charge the backup battery as soon as possi-
ble in this case.
NOTE: It is necessary to charge the battery when
the battery charge reaches below 10%. If
the battery does not accept a charge, con-
tact unitech Technical Support.
Main battery
voltage