Spec Sheet

PW105
Compact
Keyboard
Wedge
Reader
The PW105 is a compact and versatile Keyboard Wedge reader
that accepts input from a bar code scanner, including wand,
CCD, laser and slot reader. It then translates the data into
keystrokes and sends it to the keyboard port. The reader
automatically reads and discriminates all commonly used
symbologies.
The PW105 also connects single/dual track magnetic stripe
reader and RS232 devices. It can be interfaced to the keyboard
port of IBM PC XT/AT, PS/2, Macintosh computers and a variety
of other terminals. Furthermore, it can also output wand
emulation or RS232 TTL signals.
The installation is plug-and-play and works as an extension of
the keyboard. When installed, there is no need to modify
existing applications and it does not require software drivers,
making your system more stable.
The configuration gives the user specific control over
symbologies, interface, and data editing features like preamble
and postamble. There is also the ability to send special keys to
the system before or after a bar code is sent.
Its advanced setup allows configuration cloning, making it easy
to copy one configuration to other decoders. This is especially
useful for large installations.
Features:
• Automatically discriminates input
device (wand, CCD, and laser diode
scanner).
• Supports input from bar code scanner,
single / dual trackmagnetic stripe
reader and RS232.
• Reads commonly used bar code
symbologies.
• Supports keyboard wedge interface to
IBM PC XT/AT, PS/2, Macintosh and
16 other terminals.
• Configures through bar code menu,
quick setup menu and custom labels.
• Supports auto flash control of CCD
and laser scanner.
• Visual and audio buzzer for good read
feedback.
Wedge Readers / Decoders