Spec Sheet

PW110 / 112
Dual-input
Keyboard &
Terminal
Wedge
Reader
The PW 110 / 112 is a flexible bar code and magnetic stripe
reader. The reader supports a variety of input devices such
as bar code wand, CCD scanner, laser diode scanner, slot
reader, and single/dual track magnetic stripe reader. It will
simultaneously connect two of such devices to the host
system.
Two different models, the PW110 and 112, offer you the
selection of keyboard wedge or RS232 terminal wedge reader.
The PW110 model is designed to be used as a keyboard
wedge reader and is compatible with IBM PC XT/AT, PS/2,
Macintosh and a variety of terminals. When installed, there is
no need to modify existing applications and it does not require
software drivers, making your system more stable.
The configuration gives the user specific control over
symbologies, interface, and data editing features like preamble
and postamble. There is also the ability to send special keys
to the system before or after a bar code is sent.
Its advanced setup allows configuration cloning, making it
easy to copy one configuration to other decoders. This is
especially useful for large installations.
The PW112 model can easily be configured and installed,
either as a serial decoder, or as an RS232 terminal wedge
reader.
Features:
• Automatically detects input device
(wand, CCD, or laser scanners).
• Two ports to accept bar code and
magnetic stripe input simultaneously.
• Reads commonly used bar code
symbologies.
• Connects with IBM PC XT/AT and
compatibles, Macintosh and RS232
terminals.
• Configures through bar code menu,
quick setup menu and custom labels.
• Supports auto flash control of CCD
scanner.
• Two LED's and audio buzzer provide
operation feedback.
Wedge Readers / Decoders