Spec Sheet

PW120
Multi-input
Keyboard &
Terminal
Wedge
Reader
The PW120 is a powerful bar code reader that can be
connected with terminals and PC's to bar code scanners,
magnetic stripe readers and serial input through keyboard or
RS232 interface.
The PW120 supports a variety of input devices for bar code
wand, CCD scanner, laser diode scanner, slot reader, magnetic
stripe reader and RS232 input device. The PW120 can operate
as a keyboard wedge reader, terminal wedge and serial reader.
As a keyboard wedge, it is compatible with IBM PC XT/AT,
PS/2 and compatibles, Macintosh, and terminals from IBM,
DEC, Wyse, DEC, HP, Memorex Telex and many more. Custom
firmware for special terminals is also available on request.
When the reader is used as a keyboard wedge reader,
operation of the keyboard is unaffected with the reader working
as an extension to the keyboard. When the reader is working
as an RS232 terminal wedge reader, operation of the terminal
is unaffected. It does not require software drivers, making your
system more stable.
The configuration gives the user specific control over
symbologies, interface, and data editing features like preamble
and postamble. There is also the ability to send special keys
to the system before or after a bar code is sent.
Its advanced decoder allows data to be filtered and modified
before it is sent to the host. This feature ensures applications
remain runnning without modifications, which are usually
expensive and time consuming.
Features:
• Automatically accepts input from
wand, CCD, or laser diode scanners.
• Three ports to accept bar code,
magnetic stripe and RS232 input
simultaneously.
• Reads commonly used bar codes.
• Connects with popular types of
PC's and terminals.
• Configures through bar code menus,
quick setup menu and custom labels.
• Supports auto flash control of
hand-held scanner.
• Two LED's and an audio buzzer
provide operation feedback.
• Advanced Data Editing allows input
data to be modified before it is sent to
the host.
Wedge Readers / Decoders