User`s manual

22
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
3. In the RFID tab, tap Setting.
4. Select A in the Antenna eld.
5. Check ClassO, Class1 and/or UHF Gen2 to enable
these RFID tag readings in the Select Tag Types
to Inventory eld.
6. Set the RF Power by moving the slide bar to 27db.
Tap X to close the setting window.
7. Tap Start Inventory, to start reading RFID tags. In
the eld below, the Counter column indicates the
number of continous RFID tag readings.
8. Tap Disconnect to stop the continous RFID tag
readings.