User`s manual

26
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Specifying an IP Address
If there is no DHCP server in the LAN environment,
assign an IP address to each RH767 through the
following:
1. Tap Start → Settings → Control Panel and then
double-tap Network and Dial-up Connections.
2. Double-tap SDCCF10G1.
3. Input the proper information in the IP address:,
Subnet Mask: and Default Gateway: eld.
4. Tap the Name Servers tab, and then input
the proper information in the Primary DNS:,
Secondary DNS:, Primary WINS: and Secondary
WINS: eld.
To avoid conict with the LAN environment, consult
with the MIS department for the correct TCP/IP
setting.