User's Manual

19
Copyright 2012 Unit
ech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Depending on the function selected, the appropriate inputs fields are displayed and valid
values are required for all fields.
Tag Access
Tag Access [Read]
Read = Bank:EPC Offset:0002 Count:0001 APwd:00000000
Command Begin (Cmd = 0010)
EPC = 3000CFE900238C87234200000000
Read = Flags:80 TagErr:00 ProtErr:0000 Data:CFE9
Command End (Status = 0000)
Access Count = 1
Tag Read Executed
Tag Access [Write]
W
rite = Bank:EPC Offset:0002
Value:1234 Count:0001 APwd:00000000
Command Begin (Cmd = 0011)
EPC = 3000CFE900238C87234200000000
Write = Flags:00 TagErr:00 ProtErr:0000 WriteCount: 1
Command End (Status = 0000)
Access Count = 1
Tag Write Executed
Scripts
The Scripts menu is shown in the following figure.
Batch Script
The Batch Access allows a user to have preconfigured access scripts to quickly configure the
reader for a specific operation. When the Run is pressed a dialog box prompts the user
to select
a batch file for execution. The batch files are basic ASCII text with specific commands to
execute in order. There is a Syntax Help button to assist a user with the script format when
operating IndyTool without the manual. The ReRun Button will re-run the last loaded script file
without prompting.
The Batch Script Syntax format legend is as follows:
Batch Script Help
Legend
* Decimal value or Hex Value (0x_)
** Same as *, but in addition -1 for all banks
# is the comment character
'durationMs' - Indicates time in ms before sending cancel
'inventory' - Executes inventory command and dumps summary upon completion
Commands
script,sleep,*durationMs