User's Manual

21
Copyright 2012 Unit
ech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
The JScript feature is legacy feature from the original MACTool which IndyTool is replacing.
The low level MacComDirect Library is used to execute these JScripts. IndyTool provides a
GUI interface to run these scripts. However, when IndyTool is installed, the MacComDirect is
registered in the system so that a JScript can be run outside the IndyTool application.
An example JScript is included in the installation directory as a sample. The example script is
called Example.js. The example will query and display the current MAC Error in a pop up box.
Disconnect
Disconnect Success
JScript Select File
JScript Run Begin
Script: C:\Program Files\IMPINJ\Impinj
IndyTool v2.2.0\JScripts\Example.js
JScript Run Success
Connect
Serial Number: impinjserialnum01
MAC Ve
rsion: 2.2.0.240
RFTrans Info: R1000 (000C00B0)
Host To MAC Interface: USB
Build Target: 1
Region: FCC (0)
Connect Success
Profile
The Profile menu is shown in the following figure.
The Profile menu has three profile functions:
1. Get the profile parameter information – The input is the Profile number.
2. Set a new active profile – The input is the Profile number.
3. Get the current active profile – There is no input to this function.
The Get profile function will display all the Gen2 RF profile information
Get Link
Profile Profile Number: 0
Configuration: 4
Identifier High: 0x00000001
Identifier Low: 0x00000000
Identifier Version: 0x443A8B29
Protocol: 0
R2T Mod Type: 0
Tari: 25000
X: 1