User`s manual

Chapter 2

Quick Start

Turning on the Rugged Tablet Computer for the First Time

 Use only the power adapter that comes with your device. Using a different power adapter

may damage your device.

 Using the provided power adapter to connect the TB100 to a power outlet is the best way

to charge it.

 The input voltage range between the wall outlet and this adapter is AC 100V–240V, and

the output voltage of this adapter is DC 12V, 2A.

 When using the TB100 for the first time, fully charge the battery for up to 8 hours to

prolong battery life and whenever the battery power is depleted.

 If the computer does not provide enough power to charge the TB100, use the wall outlet

instead.

 The TB100 CANNOT be charged via the USB port on the computer.

Note: The battery is not fully charged. Allow your battery to fully charge before using it (i.e.,

before disconnecting AC power). Calibrating the battery before use is also highly

recommended.

The power button turns your RTC on and off. Hold the button for two seconds to power on. To

start or wake it up from sleep mode, hold the power button for 0.5 seconds to display the

shutdown confirmation. If the system is unresponsive, hold the power button to power off. A

forced power off may result in data loss. It is strongly recommended that important data is

backed up on a regular basis.