Installation Instructions

the pulse peak and pulse width are large enough, it may cause damage to the BCM.
Therefore, please confirm that the avalanche diode is installed inside the generator for
protection, and the avalanche voltage is lower than 35 V.
(1)
Load Dump refers to the disconnection of the battery from the generator due to
corrosion of the power line during the operation of the generator.
8 Fault analysis and elimination
The fault diagnosis protocol is determined by the customer and the UAES.
9 Maintenance and repair
BCM does not require any maintenance, maintenance or calibration work.
10 Transportation and storage
10.1 Hoisting, transportation precautions
During the transportation process, BCM should pay attention to handling it gently and
avoid over-pressing the packing box to avoid damage to BCM.
10.2 Storage conditions, storage period and precautions
BCM should be stored in a cool, dry, dust-free environment, and BCM must never
be exposed to liquid contaminants. BCM can be stored for 2 years under the condition
of storage conditions. The BCM has a storage temperature range of 0 °C to 30 °C and
a humidity range of 0 to 80% RH.
11 Other
11.1 Receipt and inspection
The consignee should check each box to confirm that the label on the box, the part
number and the part number requested for delivery are the same. If damage is found, it
must be promptly reported to the relevant department of UAES.
11.2 Unpacking check notes
Care should be taken when handling the unpacking and avoid over-pressing the