Installation Instructions

Figure1 Angle of installation
The installation angle recommended by UAES, in the vertical direction, allows
the installation angle to be 20° to 90°, as shown in Figure 1. If the installation
direction and angle are outside the recommended range, the UAES’s engineers and
the OEM’s engineers will need to make an assessment.
In order to allow any liquid to automatically flow away from the BCM plug, the
wire harness is preferably arranged in a downwardly inclined direction from the BCM
lead (the BCM plug terminal faces downward). BCM should be installed to avoid any
liquid flowing directly to the BCM connector..
The BCM does not ensure that all dust is prevented from entering, but the dust at the
BCM interface is not excessively permeable, affecting the reliable operation of the BCM or
impairing safety performance.
6.6 Fixation of BCM
BCM is fixed on the car with one M6 bolt and two snaps, specific parameters
can refer to AZ drawings. It is recommended to use high-strength metal materials
such as low-carbon steel for the mounting bracket. The metal bracket needs to be
surface treated to prevent corrosion, and the metal bracket cannot cover or be close