Instruction manual

STEP 1
Apply
power
ro the unit.
STEP !
Press
l.
The LCD will read:
The LCD
will change ro read:
NOT PROGRAMMED
USP AD2OOO X.X
PRESS KEYPAD #1
tften..PROGRAM:
NUMBERS
then:
SELECT:
l-8
O(DONE)
First
Time Installation
to Initialize
Dialer Follow
Ste
I
&2.
Press
"*"
to store the
sequence.
Example: To
store numeric
pager
number
555-1212, a 4-second
Pause
and code 3456:
Press
r-El
@ @ [
Ll l@
ttl]
@
l@
[F]
[-Eri
[tl
i@ {@]
@
STEP 38
-
TELEPHONE
NUMBERS
If
you pressed "2"
and
wish
to
program
in
a telephone
number.
. .
Press the digits
of the
number
to be dialed. For long-distance
numbers, first
press "l"
followed
by the area code and then
the
number. The
number will appear on
the
LCD.
Press
"*"
to store the sequence.
Exampl
e
:
Store telephone
number
I
-800-555-
I 2 I 2 :
Press:
@ @l
(o-j
l@
:C
@
iltrl ai!
i.i?r
U
i@l
E)
REMEMBER/NOTE: Before
programming your
dialer to call the
police,
fire
department 0r 9-1-1 directly,
you
must check with these
agencies
for
their
approval.
STEP
3C
-VOICE
PAGERS
If
you pressed
"2"
and
wish
to
program
in
a
voice pager...
Press the digits of the
pager
to be called.
Press
"P"
one or more times in accordance with the number
of
seconds needed
to accommodate the
pager.
(Remember
each
"P"
provides
a 2-second
pause).
Press
"*"
to store the sequence. The number will appear on the
LCD.
Example: To store voice
pager
555-1212 and a 4-second
pause:
Press:
tO
tt4j
tO
LEI [r.lite bll
STEP
4 Repeat
steps 1-3 fbr each number to be
programmed
in
each location.
Select any of 8
location
numbers in Step
1
(SELECT:
1-8) for
each
number to
be
programmed.
STEP 5 When
you
are done
programming
all desired
telephone and/or
pager
numbers,
press
tt0tt
to exit
this
section.
NOTE: IF YOU ENTER THE WRONG
CHOICE,
PRESS
"M"
KEY
REPEATEDLY AND RETURN TO THE
*PROGRAM
MODE",
THEN
SELECT
THE
SECTION
TO
CHANGE
C'T''
ACCEPT SECTION,
"2''
FOR NEXT SECTION). THEN ENTER
CORRECT INFORMATION,
Programming
Telephone
And/Or Pager
Numbers
You are now ready to begin programming
the dialer.
All
programming
can be input before
connecting the dialer to a
telephone line. Check the unit's LCD
as
you program
numbers
in the dialer to ensure accuracy. Please
complete all
programming
instructions before
attempting to operate the unit.
Before
programming your
dialer to
call
the police, fire
department or 9-l-l directly,
you
must check with
these
agencies
for
their approva..
A maximum of 50 digits
(including
pauses)
can be
programmed
in at each location.
*PROGRAM:
NUMBERS SELECT:1-8
r(YES) 2(NO
)
O(DONE)
+This
prompt will
apper
after a number
has been
programmed
and this sec-
tion has been exited.
STEP
I Press location number l-8
to
program
the first
number. This
can be
any location
l-8. You do not have to
program
locations in sequence. For example,
you
can
program
numbers
in locations 3 and 5. When
you
are done
programming
all
the desired
telephone and/or
pager
numbers,
press
"Ot'to
exit this
section.
The LCD will
read: PAGER
I(YES) 2(NO)
STEP 2 Press
"1"
if
you
wish
to
program
in a
numeric pager
number
(step
3A). Press
"2"
if
you
wish
to
program
in a
telephone number
(step
3B), cellular
phone
numer
(step
3B), or
a voice
pager
(step
3C).
STEP 3A. NUMERIC
PAGERS
NOTE:
WHEN
PROGRAMMING NUMERIC
PAGERS, YOU MUST
PROGRAM IN
ONE OR
MORE PAUSES.
EACH'P" PROVIDES A 2-
SECOND PAUSE. BEFORE PROGRAMMING IN A PAGER.
CALL
THE
NUMBER
TO DETERMINE
THE
NUMBER OF 2-SECOND PAUSES TO BE
PROGRAMMED IN,
Ifyou
pressed
"l"
to
program
in a numeric pager...
Press the digits of the
pager
to be
called.
The numbers will
appear on the LCD, as
will
the following key
designations.
Press
"P"
one or more times in accordance with the number
of
seconds needed
to
accommodate
the
pager.
(Remember,
each
"P"
provides
a 2-second
pause).
Press
the digits ofthe
numeric pager
code.
NOTE:
SOME
PACER SERVICES REQUIRE
A
"#"
SIGN FOR
SEPARATION OF THE NUMERIC CODE
OR
AT THE END
OF
THE
NUMERIC
CODE
FOR PROPER TRANSMISSION.