MODEL AD-2000 Automatic Voice/Pager Dialer System with Verification Not just the next generation…it’s the next millennium! Versatile * Full-featured * Easy to Program 2-way Listen in Verification Operates with all alarm systems Ideal stand-alone dialer Provides reliable emergency notification 24 hours a day
MODEL AD-2000 Owner’s Manual and Operating Instructions The Automatic Voice/Pager Dialer System For The Next Millennium Congratulations! Thank you for purchasing United Security Products, Inc.’s Model AD-2000 - the “smartest”, most comprehensive automatic voice/pager security dialer available.
THIS PACKAGE CONTAINS: 1 ea. MODEL AD-2000 1 ea. PHONE CABLE 1 ea. INSTRUCTION MANUAL 4 ea. 1K RESISTORS TABLE OF CONTENTS Section Page number Package contents………………………………………………………………… 3 Panel Displays…………………………………………………………………… 4 Installation Hookups: Alarm Panel……………………………………………... 5 Installation Hookups: Stand Alone……………………………………………… 6 Programming the Dialer…………………………………………………………. 7-11 Overview……………………………………………………………………… 7 Programming Phone/Pager Numbers………………………………………….
PANEL DISPLAYS 4
AD-2000 INSTALLATION HOOKUPS Alarm Panel 5
AD-2000 INSTALLATION HOOKUPS Stand Alone 6
PROGRAMMING THE DIALER Overview Please study this section thoroughly before beginning to program the dialer, referring to the Sample Program Planner on page 13. Then, select from among the options for each feature, listing each choice in pencil on the blank Program Planner on page 14. Once the dialer is correctly programmed, list each choice in ink. One copy of the Planner should be kept by the installer; one copy should remain with the end user.
PROGRAMMING THE DIALER First Time Installation to Initialize Dialer Follow Steps 1 & 2. STEP 1 Apply power to the unit. The LCD will read: NOT PROGRAMMED PRESS KEYPAD #1 STEP 2 Press 1. The LCD will change to read: USP AD2000 X.X then: PROGRAM: NUMBERS then: SELECT: 1-8 0(DONE) Programming Telephone And/Or Pager Numbers You are now ready to begin programming the dialer. All programming can be input before connecting the dialer to a telephone line.
PROGRAMMING THE DIALER Programming Auxiliary Information Structuring Your Outgoing Messages The dialer is preset at the factory to typical telephone line (TLINE), PBX, Dialing Attempts and Message Repeat options. If you choose to accept the following default prompts, simply press “2” to scroll to the next section. If your phone system requires dialing a digit to get an outside line or dial tone, similar to PBX, then turn PBX on and enter digit to program.
PROGRAMMING THE DIALER Programming And Recording Your Outgoing Messages Programming The Channels The AD-2000 is designed to be adaptable to a complete range of personalized applications. Each of the four input channels can be programmed individually for full system customization. In addition to setting enable/disable options, entry/exit delays and type of activation (N.O., N.C., & momentary or continuous), each user can specify which emergency messages will be delivered and which numbers will be dialed.
PROGRAMMING THE DIALER Normally Open/Normally Closed B) Continue the above procedure for each of the up to eight phone/pager numbers programmed in. STEP 9 The LCD will read: CH X: OGM X 1(YES) 2(NO) (“OGM X” being the OGM recorded in OGM options #2 - #8) A) Press “1” to deliver OGM X when the channel is activated. Press “2” if you do not wish this OGM to be delivered. B) Continue the above procedure for each Channel/OGM.
OPERATING YOUR SYSTEM You are now ready to begin operating your system, relying on the AD-2000 to work in conjunction with your alarm system to provide 24-hour security reassurance and peace of mind. When in the operating mode, the system will monitor all the enabled channels, initiating dialing when a valid alarm condition occurs. Upon activation the dialer will begin calling each phone/pager number selected, in sequence, for the pre-selected number of attempts.
Sample Program Planner specific outgoing messages (OGMs). STEP 7 Using a prepared script and speakin g six-to-eight inches from the dialer’s microphone on the front of the unit, press “R” when you are ready to enunciate your 15-second identification message and your two 18-second messages. Dialer automatically prompts to next OGM. Make OGM1 a message telling the receiving party to call the police department. Make OGM2 a message to call the fire department.
Fill out this Program Planner in pencil initially After thoroughly testing your system, redo your Program Planner in ink. One copy should be kept in a safe place by the end user; one copy should be retained by the installer.
SPECIFICATIONS Dimensions Power source: Current (OPERATE mode – standby): Current (OPERATE mode – dialing): Activation: Max. digits for outgoing numbers: Operating temperature range: Dimensions (inches): Weight (ounces): Mounting: Case Material: Color: Warranty: 9-18VDC 28mA typical. 100mA max. 1) N.C. Activation: dialer activates when an “open” is detected 2) N.O. Activation: dialer activates when a “close” is detected 3) Voltage Activation: N.C. (applied voltage: Min. +5VDC, Max. +28VDC) N.O.
IMPORTANT INFORMATION Care And Precautions LOCATION with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class ‘B’ computing device in accordance with the specifications in Subpart B of FCC Rules and Regulations (as outlined in the Code of Federal Regulation, Title 47), which are designed to provide reasonable protection against such interference in a residential installation.
AD2000 SERIES FAQ SHEET 1. Can the dialer be used as a stand-alone unit? Yes, Purchase USP part# PB12P to provide both main power and battery backup. The PB12P plugs right into the 12vdc input jack on top of the dialer. USP’s warranty dies not cover reverse polarity or lightning strikes and other acts of God. When using electrical devices, we recommend using surge protection for any voltage feeding into this unit ,i.e. phone line, power source, etc.. 2.
