Owner`s manual

27
Your Osburn stove has been designed to reduce the amount of creosote produced. Even so, the
chimney connector pipe and chimney should be inspected at least once every two months during
the heating season to determine if a creosote build-up has occurred. If creosote has accumulated, it
should be removed to reduce the risk of chimney fire. Call a professional chimney sweep, or go to
your local Osburn dealer, purchase a chimney brush, and have the chimney cleaned.
3.4 Baffle Installation and Brick Notes
1. Stack the baffle boards (A) on top of the vermiculite boards (B) as shown in Figure 8a.
FIGURE 8a
2. Put them on the horizontal air duct (C) (see Figure 8b). Afterwards, push them towards the bottom and
sides so that they rest on the back of the firebox (D) and on the side air ducts. Install the baffle
support/extension (H) ensuring that it fits between the front risers and hold it in place. Install the front
secondary air tube as show in figure 3.4c ensuring air holes face forward. Install the cotter pins as in
Figure 8. Installing the front secondary air tube (E) will stabilize baffle assembly during the next step.
FIGURE 8b