User's Manual

16
CONFIGURATION OPTIONS – DESCRIPTION SUMMARY
Only those marked with an asterisk (*) are available to the homeowner.
SW01 — Equipment Type
SW02 — Clean Filter Timer Adjustment
SW03*— Fahrenheit/Centigrade Selection
SW04 — Fan (G) on with W/W1 Selection
SW05 — Room Air Temperature Sensing (programmable models only)
SW06 — Cooling Lockout Below 55_F/13_C Selection (only available if outdoor air sensor is
present)
SW07 — Zoning
SW08 — Auxiliary Heat Lockout Temperature Setting (only available when heat pump is used
and when outdoor air temperature sensor is present)
SW09 — Heat Pump Lockout Temperature Balance Point (only available when outdoor air
temperature sensor is present)
SW10 — Reversing Valve
SW11 — Adjustable Setpoint Deadband (not available on heat only and cool only systems)
SW12 — Smart Recovery
SW13 — Room Temperature Offset Adjustment
SW14 — Humidity Offset Adjustment
SW15 — Enable Auto Mode
SW16 — Cycles Per Hour
SW17 — Time Between Stages
SW18*— Backlight Configuration
SW19 — Dry Contact
SW20 — Outdoor Air Temperature Offset Adjustment
SW21*— Keypad Lockout
SW22 — High Cool Latch Temperature
SW23 — High Heat Latch Temperature
SW24*— Programmable/Non—Programmable
SW25*— Number of Programmable Periods per Day
SW26 — Minimum Cooling Setpoint
SW27 — Maximum heating Setpoint
SW28 — UV Light Reminder
SW29 — Humidifier Pad Reminder
SW30*— Programmable Fan
SW31*— Daylight Savings Time Configuration
SW32 — Furnace Heat Staging
SW33 — Single or Two--Piece Installation
SW34 — Hybrid Heat Furnace Latch
SW35 — Advanced Smart Setback
SW40 — Fan Humidify
SW41 — Variable Speed Blower
SW42 — Variable Speed Super Dehumidification
SW43 — Intelligent Heat Staging
SW44 — Super Comfort Heat
SW99 — Reset to Factory Defaults