User's Manual

29
To set the clock, press MENU > Next until Settings is blinking the press Select. Use the up/dn
arrows to move to time then press Select. The Clock will be displayed at the bottom of the
screen. Use the up/dn arrows and next button to adjust the time. Setting the date may be changed
by navigating to MENU > Next until Settings is blinking the press Select. Use the up/dn arrows
to move to Date then press Select. The UP/DOWN buttons are used to change the Month, Day,
and Year setting when the numbers are blinking.
To change the schedule, from the home screen press MENU > Schedule then Select > up/dn
arrows to move through the following options to modify.
PROFILES
Wake, Away, Home, Sleep Temperatures
PROGRAM
All days, Weekdays, Weekends, Individual days
NUM PERIODS
2 or 4 Periods
HOLD PREFER
sched | perm | timed
PRGM ENABLE
Enabled / Disabled
CIRCULATION
0 to 60 minutes (steps of 5) per activity
TOUCH-N-GO
Enabled / Disabled
ALL PROGRAM PERIODS (WAKE, AWAY, HOME, SLEEP) MUST OCCUR WITHIN THE
SAME 24 HOUR PERIOD.
Humidity Control Features
The various humidity control features of the Côr 7 thermostat are explained below. They are
grouped into 2 sections, humidification and dehumidification. Instructions on how to select each
feature are given at the end of each section.
Humidification
The Côr 7 thermostat can control a standard 24VAC humidifier to control humidification in the
home. A humidify setpoint between 10 and 44% relative humidity in 2% increments is selected
by the homeowner. When humidity in the home drops below setpoint, humidifier will be turned
on to raise humidity level. See Table 2 for reference.
Table 2 – Humidification Selections
Selection
Humidify Setpoint Range
Normal Humidify
10 – 44% Steps of 2%
Auto Humidify (Window Protect™)
Level 1 - 9
Humidify with Fan
Off, On
Hum Off
Off
To get to settings for Humidity
From the home screen press Menu > Settings > up/dn arrow to get to Humidify > Select then
scroll through options with up/dn arrows.
1. Normal Humidify