Instructions / Assembly
PTFE Coated Fiberglass Draw Cord
Safety Data Sheet
MSDS Number: ROP-02-SP
Revision Date: 5-25-16
Page 2 of 4
Eyes: Not normally considered hazardous, if irritation occurs ush with water, if irritation
persists consult a physician.
Inhalation: N/A for material as supplied at room temperature and used as intended.
Processing at high temperature may generate fumes, which can cause u-like symptoms.
Remove to fresh air, consult physician if severe.
Ingestion: If swallowed consult a physician. Do not induce vomiting unless instructed to do
so by a physician.
Most Important Symptoms and Effects: Polymer Flu Fever. Inhalation of the thermal
decomposition products, arising from high temperature or re will cause u like symptoms.
Symptoms may be delayed several hours.
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media: Use media appropriate to primary source of re.
Specic Hazards During Fire-Fighting: Material is incombustible but if other fuel is present
decomposition products will burn at about 1250F, producing toxic and corrosive gaseous
products.
Special Protective Equipment: Wear self-contained breathing apparatus and protective
suit. Wear neoprene gloves during cleaning up work after a re.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: N/A Solid material
Environmental Precautions: N/A Solid Material
Methods & Materials for Cleanup: Collect with hands, broom, shovel, and/or vacuum.
7. HANDLING AND STORAGE
Store and handle using good warehouse practices. Avoid contamination of tobacco
products.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: NA
Personal Protective Equipment: Use appropriate NIOSH-approved respirator in the
presence of dust or decomposition fumes
Eye and Face: Use of safety glasses is recommended
Hands, Arm, and Body: Material is small in diameter yet relatively strong, and can