Instructions / Assembly

PTFE Coated Fiberglass Sewing
Thread
Safety Data Sheet
MSDS Number: THRD-09-SP
Revision Date: 5-25-16
Page 2 of 4
4. FIRST AID MEASURES
Inhalation: Remove person to fresh air. If condition persists, seek medical attention.
Skin Contact: Rinse with copious quantities of cool water. If rash or itching persists, seek
medical attention.
Eye Contact: Rinse with water. Do not rub eyes. Seek medical attention.
Ingestion: Not applicable.
5. FIRE FIGHTING MEASURES
Flash Point (Method Used): >250 °C by TOC Flammable Limits
LEL: N/A UEL: N/A
Extinguishing Media: Water, carbon dioxide, or dry chemical
Special Fire Fighting Procedures: Thermal decomposition of ber coating may produce
an irritating mixture of smoke and fumes.
Unusual Fire and Explosion Hazards: None
6. ACCIDENTAL RELEASE MEASURES
Material is a solid in roll form. If accidently released, rewind material back onto roll.
7. HANDLING AND STORAGE
Handling Precautions: Use adequate material handling equipment.
Storage Requirements: Store in dry place. Use may be at temperature extremes based on
product data, but storage should be at ambient temperature.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: Local exhaust; dust collection
Personal Protective Equip: HMIS PP, A | Safety Glasses
Safety glasses; cotton gloves; long sleeve clothing
Wash thoroughly with soap and water after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Tan Thread
Physical State: Solid