Instructions / Assembly

Needle Mat
Safety Data Sheet
MSDS Number: INS-23-SP
Revision Date: 5-25-16
Page 2 of 4
P337 - If eye irritation persists: _
P337+313 - Get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:
Fibrous Glass (CAS 65997-17-3)
OSHA PEL: 15 milligrams per cubic meter of air (total); 5 milligrams per cubic meter of air
(respirable)
ACGIH TLV: 1 ber per cubic centimeter of air
4. FIRST AID MEASURES
Inhalation: Remove person to fresh air. If condition persists, seek medical attention.
Skin Contact: Rinse with copious quantities of cool water. If rash or itching persists, seek
medical attention.
Eye Contact: Rinse with water. Do not rub eyes. Seek medical attention.
Ingestion: Not applicable.
5. FIRE FIGHTING MEASURES
Flash Point (Method Used): >250 C by TOC Flammable Limits
LEL: N/A UEL: N/A
Extinguishing Media: Water, carbon dioxide, or dry chemical
Special Fire Fighting Procedures: Thermal decomposition of ber coating may produce
an irritating mixture of smoke and fumes.
Unusual Fire and Explosion Hazards: None
6. ACCIDENTAL RELEASE MEASURES
Material is a solid in roll form. If accidently released, rewind material back onto roll.
7. HANDLING AND STORAGE
Handling Precautions: Use adequate material handling equipment.
Storage Requirements: Store in dry place. Use may be at temperature extremes based on
product data, but storage should be at ambient temperature.