Instructions / Assembly

Black Nomex Thread
Safety Data Sheet
MSDS Number: THRD-08-SP
Revision Date: 5-25-16
Page 3 of 6
Provide grounding of equipment to prevent static build-up.
Personal protective equipment
Eye protection: Safety glasses with side-shields
Respiratory protection: When workers are facing concentrations above the exposure
limit they must use appropriate certied respirators.
Exposure Guidelines
Exposure Limit Values
Meta-aramid
AEL * (DUPONT) 10 mg/m3 8 hr. TWA Total dust.
AEL * (DUPONT) 5 mg/m3 8 hr. TWA Respirable dust.
Para-aramid
AEL * (DUPONT) 2 bers/cm3 8 & 12 hr. TWA Respirable bers.
AEL * (DUPONT) 5 mg/m3 8 & 12 hr. TWA Non-brous particulate
and/or nonrespirable
bres.
N,N-Dimethylacetamide
PEL (OSHA) 10 ppm 35 mg/m3 8 hr. TWA
Skin designation applies.
Skin designation applies.
TLV (ACGIH) 10 ppm TWA
AEL * (DUPONT) 10 ppm 8 & 12 hr TWA Skin
* AEL is DuPont’s Acceptable Exposure Limit. Where governmentally imposed
occupational exposure limits, which are lower than, the AEL are in effect, such limits shall
take precedence.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Nonwoven fabric, woven fabric, bres, yarn
Color: Black, pigmented
Odor: None
Melting point/range: N/A
Specic Gravity: 1.38
Water solubility: Insoluble
10. STABILITY AND REACTIVITY
Conditions to avoid: Temperature > 200 °C (> 392 °F).
Heating can release hazardous gases.