Instructions / Assembly

Gray Silicone
Safety Data Sheet
MSDS Number: CL-08-SP
Revision Date: 5-25-16
Page 3 of 4
Physical State: Solid
Spec Grav. /Density: 2.4
Boiling Point: N/A
Vapor Pressure: N/A
pH: N/A
Odor: No Odor
Solubility: Negligible
Freezing/Melting Pt.: > 1000°F
Vapor Density: N/A
10. STABILITY AND REACTIVITY
Stability: Material is stable.
Conditions to Avoid: None known.
Materials to Avoid: Strong-oxidizing agents.
Hazardous Decomposition: Carbon monoxide; carbon dioxide
Hazardous Polymerization: Will Not Occur.
11. TOXICOLOGICAL INFORMATION
Direct contact with berglass materials or exposure to airborne berglass dust may irritate
the skin, eyes, nose and throat. Fiberglass can cause itching due to mechanical irritation
from the bers. This is not an allergic reaction to the material. Breathing bers may irritate
the airways resulting in coughing and a scratchy throat. Some people are sensitive to the
bers, while others are not.
12. ECOLOGICAL INFORMATION
No known hazards except for airborne bers caused by nuisance dust. 10 milligrams per
cubic meter for ber diameters less than 7 microns.
13. DISPOSAL CONSIDERATIONS
Incineration preferred in a federal, state, or local approved facility.
14. TRANSPORT INFORMATION
None special required.
15. REGULATORY INFORMATION
COMPONENT / (CAS/PERC) / CODES
None known
16. OTHER INFORMATION