Black Foam Rubber Safety Data Sheet Page 1 of 3 MSDS Number: INS-07-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Black Foam Rubber MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 3 Inhalation: Not required under normal use. If irritation persists, remove from exposed area. Eye Contact: Not required under normal use. Flush with water until all traces of this material are gone. Seek medical attention if irritation persists. Skin Contact: Not required under normal use. Ingestion: Not applicable. 5.
Black Foam Rubber Safety Data Sheet Page 3 of 3 MSDS Number: INS-07-SP Revision Date: 5-25-16 Water Vapor Permeability: 0.03 Perm-inch (4.38x10-14 Kg/Pa s m) Water Absorption (%by weight): 5% by weight Compression Set: Excellent Flammability: Self-extinguishing 10. STABILITY AND REACTIVITY Stability: Material is stable. Conditions to Avoid: None known. Materials to Avoid: Strong-oxidizing agents. Hazardous Polymerization: Will Not Occur.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 1 of 8 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Black M/F Buckles Common Name(s): Side Release Buckles EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Black M/F Buckles Safety Data Sheet Page 2 of 8 MSDS Number: INS-07-SP Revision Date: 5-25-16 Carcinogenicity Information The following components are listed by IARC, NTP, OSHA or ACGIH as carcinogens. Material FORMALDEHYDE: CARBON BLACK: IARC 1 2B NTP X OSHA X ACGIH A2 3. COMPOSITION/INFORMATION ON INGREDIENTS Material: CAS Number % Acetal Polymer: >98 Stabilizer: <2 Formaldehyde: 50-00-0 <0.005 Carbon Black: 1333-86-4 0-0.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 8 “Delrin” dust cloud ignition temperature is 440 degrees C (824 degrees F). Not a fire or explosion hazard. Burns with invisible flame. Hazardous gases/vapors produced in fire are carbon monoxide, formaldehyde. Extinguishing Media Water, Foam, Dry Chemical, CO2. Fire Fighting Instructions Keep personnel removed and upwind of fire. Wear self-contained breathing apparatus. 6.
Black M/F Buckles Safety Data Sheet Page 4 of 8 MSDS Number: INS-07-SP Revision Date: 5-25-16 possibility exists for eye and face contact due to splashing or spraying of molten material. RESPIRATORS When temperatures exceed 230 degrees C and ventilation is inadequate to maintain concentrations below exposure limits, use a positive pressure air supplied respirator. Air purifying respirators may not provide adequate protection.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 8 Solubility in Water: Insoluble Odor: Slight formaldehyde Color: Off-White, Black. Form: Pellets Specific Gravity: >1.00 10. STABILITY AND REACTIVITY Chemical Stability Stable at normal temperatures and storage conditions. Conditions to Avoid Maintain polymer melt temperatures below 230 C (446 F). Avoid prolonged exposure at or above the recommended processing temperatures.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 6 of 8 Inhalation 6 hour LC50: > 22,000 mg/m3 in rats Oral LD50: > 11,000 mg/kg in rats Delrin is not a skin irritant, and is not a skin sensitizer in animals. Single or repeated inhalation exposures to high concentrations of Delrin dust resulted in collapse of some areas of the lungs, other areas were over-inflated. This effect was seen as late as 11-19 days post-exposure.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 8 13. DISPOSAL CONSIDERATIONS Preferred options for disposal are (1) recycling, (2) incineration with energy recovery, and (3) landfill. The high fuel value of this product makes option 2 very desirable for material that cannot be recycled, but incinerator must be capable of scrubbing out acidic combustion products.
Black M/F Buckles MSDS Number: INS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 8 of 8 of this information for the user’s intended purposes or for the consequences of its use. Individuals should make a determination as to the suitability of the information for their particular purpose(s).
Nickel-Plated Metal Grommet Safety Data Sheet Page 1 of 4 MSDS Number: FAS-67-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Nickel-Plated Metal Grommet MSDS Number: FAS-67-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 4 person. 5. FIRE FIGHTING MEASURES Fire Extinguisher Type: Consistent with other substances involved. Fire/Explosion Hazards: Not combustible/fire hazard. Fire Fighting Procedure: Consistent with other substances involved. Wear self-contained breathing device. 6.
Nickel-Plated Metal Grommet MSDS Number: FAS-67-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 4 Stability: Stable Conditions to Avoid: Acids. Hazardous Decomposition Products: Hydrogen gas when contacted with acids. Materials to Avoid: Nickel can react with acids can create hydrogen gas, which can form explosive mixtures in air. 11.
Nickel-Plated Metal Grommet MSDS Number: FAS-67-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 4 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Black Nomex Thread Safety Data Sheet Page 1 of 6 MSDS Number: THRD-08-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Black Nomex Thread Common Name(s): Nomex Aramid Fire Retardant Thread, Nomex Sewing Thread EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Black Nomex Thread MSDS Number: THRD-08-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 6 4. FIRST AID MEASURES General advice: No hazards, which require special first aid measures. If symptoms persist, call a physician. If irritation occurs, flush area thoroughly with water. 5. FIRE FIGHTING MEASURES Flammable Properties Flash point: not applicable Thermal decomposition: > 300 °C (> 572 °F) Fire and Explosion Hazard: Hazardous decomposition products formed under fire conditions.
Black Nomex Thread Safety Data Sheet Page 3 of 6 MSDS Number: THRD-08-SP Revision Date: 5-25-16 Provide grounding of equipment to prevent static build-up. Personal protective equipment Eye protection: Safety glasses with side-shields Respiratory protection: When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Black Nomex Thread Safety Data Sheet Page 4 of 6 MSDS Number: THRD-08-SP Revision Date: 5-25-16 Incompatibility: Strong acids and strong bases Decomposition: Decomposition temperature: > 300 °C (> 572 °F). Hazardous decomposition products Carbon monoxide, nitrogen oxides (NOx), Hydrogen cyanide (hydrocyanic acid). 11.
Black Nomex Thread MSDS Number: THRD-08-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 6 Repeated dose toxicity: Dermal Central nervous system depression, Liver effects, Skin effects Oral Pathologic changes, Stomach, Testes, Liver, Kidney, Abnormal decrease in number of red blood cells (anaemia) Inhalation Kidney effects, Liver effects, Retinal damage Carcinogenicity: Did not show carcinogenic effects in animal experiments. Mutagenicity: Did not cause genetic damage in cultured bacterial cells.
Black Nomex Thread MSDS Number: THRD-08-SP Revision Date: 5-25-16 Safety Data Sheet Page 6 of 6 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Black Polypropylene Webbing Safety Data Sheet Page 1 of 4 MSDS Number: FAS30-SEW01-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Black Polypropylene Webbing MSDS Number: FAS30-SEW01-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 4 Flash Point And Method: Not Applicable Extinguishing Media: Use water fog, foam, dry chemical or CO2 Auto Ignition Temperature: Not Applicable Special Firefighting Procedures And Precautions: Material will not burn unless preheated. Do not enter confined fire space without full bunker gear (helmet with face shield, bunker coats, gloves and rubber boots). Cool fire exposed containers with water.
Black Polypropylene Webbing MSDS Number: FAS30-SEW01-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 4 (Other Solvent) Soluble In Tetrahydronaphthalene, Tetrachloroethane Etc. Viscosity: Not Applicable Melt Point: 130 ~ 170°C Boiling Point: Not Applicable Decomposition Temperature: Not Applicable Vapor Pressure: Not Applicable Vapor Density (Air=1): Not Applicable Evaporation Rate: Not Applicable Specific Gravity (H2o=1): 0.89 ~ 0.91 Molecular Weight: >10,000 10.
Black Polypropylene Webbing MSDS Number: FAS30-SEW01-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 4 Label Warning: Caution: May cause respiratory irritation during thermal processing operations. DOT Hazard Classification: Not regulated DOT Proper Shipping Description: None EPA Hazardous Substance and Reportable Quantity: Not listed RCRA Hazardous Waste: Not listed SARA Title III Section 302 Extremely Hazardous Substances: None present SARA Title III Section 313 Toxic Chemicals: None present 16.
PTFE Heating Cable Safety Data Sheet Page 1 of 5 MSDS Number: HE&C-080910-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: PTFE Heating Cable Common Name(s): EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
PTFE Heating Cable MSDS Number: HE&C-080910-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 5 Eye Contact: immediately filed eyelid accidentally gets in the eyes with plenty of water rinse, then go hospital for treatment. Inhalation: quickly get out there to air freshening place, keeps breathing smoothly. Perform oxygen therapy once hard to breach. Perform artificial respiration once breathing stop and then go to hospital. Ingestion: / 5.
PTFE Heating Cable MSDS Number: HE&C-080910-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 5 carrying. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Maximum Allowable Concentration: Pointless Detection Method: / Engineering Control: enclosed operation, total exhaust. As mechanized and automated as possible. Respiratory Protection: Avoid breathing in the high-temperature pyrolysis gas during the processing and manufacturing.
PTFE Heating Cable Safety Data Sheet Page 4 of 5 MSDS Number: HE&C-080910-SP Revision Date: 5-25-16 Harm of polymerization: not polymerized Conditions of avoiding exposure: alkalis and alkaline rare earth metals, react with its metal powder below 370 °F. Decomposition product: carbon monoxide, carbon dioxide, hydrogen fluoride, erfluoroisobutylene (PFIB), fluorophosgene. 11. TOXICOLOGICAL INFORMATION Acute Toxicity Test: Irritant: No data LD50: No data; LC50: No data 12.
PTFE Heating Cable MSDS Number: HE&C-080910-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 5 (Commonly Used Classification of Dangerous Chemicals and Signs) (GB13690—1992) 16.
Black PVC Fabric Safety Data Sheet Page 1 of 4 MSDS Number: CL-25-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Black PVC Fabric Safety Data Sheet Page 2 of 4 MSDS Number: CL-25-SP Revision Date: 5-25-16 4. FIRST AID MEASURES Eyes Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain medical attention if soreness or redness persists. Skin If molten material comes in contact with skin, cool under ice water or running stream of water. Do not attempt to remove the material from the skin as this may result in severe tissue damage. Seek medical attention immediately.
Black PVC Fabric MSDS Number: CL-25-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 4 7. HANDLING AND STORAGE Use safe handling practices to avoid physical Injury. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Not applicable Ventilation: Not Applicable Respiratory Protection: Not applicable Eye Protection: Not applicable Skin Protection: Not applicable Exposure Guidelines: Not applicable 9.
Black PVC Fabric MSDS Number: CL-25-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 4 14. TRANSPORT INFORMATION DOT CFR 172.101 Data Transportation (IATA) Not Regulated 15. REGULATORY INFORMATION NFPA Ratings NFPA Code for Flammability -1 NFPA Code for Health -0 NFPA Code for Reactivity -0 NFPA Code for Special Hazards – 0 TSCA (40 CFR 710) Polyvinyl Chloride is listed in the TSCA Inventory EPA SARA Title III: None CERCLA: None WHMIS Class: Not Regulated – Manufactured Article 16.
Stainless Steel Hog Ring Safety Data Sheet Page 1 of 7 MSDS Number: FAS-02-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Stainless Steel Hog Ring Common Name(s): Stainless Steel Type 301, 302, 303, 304, 305, 308, 309, 310, 314, 321, 347, 415, F6NM, 1.
Stainless Steel Hog Ring Safety Data Sheet Page 2 of 7 MSDS Number: FAS-02-SP Revision Date: 5-25-16 Silicon Cobalt Nonhazardous Ingredients Sizing Iron (Fe) dust fumes (as Iron oxide) C* = Ceiling limit 0.0 to 5.0 0.0 to 5.0 none 0.1 mg/m3 <1 48 to 89 ------------------none established--------------------------------------------none-------------------------10 mg/m3 10 mg/m3 0.05 mg/m3 5.0 mg/m3 4. FIRST AID MEASURES Inhalation: Move individual to fresh air.
Stainless Steel Hog Ring MSDS Number: FAS-02-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 7 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Ventilation: General dilution ventilation and/or local exhaust ventilation should be provided, as necessary, to maintain exposures below PEL’s or TLV’s. Adequate ventilation must be provided at elevated temperatures.
Stainless Steel Hog Ring MSDS Number: FAS-02-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 7 Vapor Density (Air = 1): N/A Evaporative Rate (Ethyl Ether = 1): N/A Solubility in Water: Not soluble Appearance and Odor: Metallic appearing accessories with no odor.
Stainless Steel Hog Ring MSDS Number: FAS-02-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 7 is observable as an x-ray change. No physical impairment of lung function has been linked to siderosis. Manganese (Mn): Mn intoxication is usually due to the oxide or salts of Mn; elemental Mn exhibits very low toxicity. The dusts and fumes can act as minor irritants to the eyes and respiratory tract.
Stainless Steel Hog Ring Safety Data Sheet Page 6 of 7 MSDS Number: FAS-02-SP Revision Date: 5-25-16 considered to be in the nuisance dust category. Silicon (Si): Silicon may produce x-ray changes in the lungs. There has been no known disability reported from the x-ray changes. Tungsten (W): There has been some reported evidence of pulmonary involvement such as a cough. Molybdenum (Mo): Molybdenum has caused, in animal studies, irritation of the nose and throat, weight loss and digestive disturbances.
Stainless Steel Hog Ring MSDS Number: FAS-02-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 7 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Stainless Steel Quilting Pin Safety Data Sheet Page 1 of 7 MSDS Number: FAS-03-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Stainless Steel Quilting Pin Common Name(s): Stainless Steel Type 301, 302, 303, 304, 305, 308, 309, 310, 314, 321, 347, 415, F6NM, 1.
Stainless Steel Quilting Pin Safety Data Sheet Page 2 of 7 MSDS Number: FAS-03-SP Revision Date: 5-25-16 Silicon Cobalt Nonhazardous Ingredients Sizing Iron (Fe) dust fumes (as Iron oxide) C* = Ceiling limit 0.0 to 5.0 0.0 to 5.0 none 0.1 mg/m3 <1 48 to 89 ------------------none established--------------------------------------------none-------------------------10 mg/m3 10 mg/m3 0.05 mg/m3 5.0 mg/m3 4. FIRST AID MEASURES Inhalation: Move individual to fresh air.
Stainless Steel Quilting Pin MSDS Number: FAS-03-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 7 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Ventilation: General dilution ventilation and/or local exhaust ventilation should be provided, as necessary, to maintain exposures below PEL’s or TLV’s. Adequate ventilation must be provided at elevated temperatures.
Stainless Steel Quilting Pin MSDS Number: FAS-03-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 7 Vapor Density (Air = 1): N/A Evaporative Rate (Ethyl Ether = 1): N/A Solubility in Water: Not soluble Appearance and Odor: Metallic appearing accessories with no odor.
Stainless Steel Quilting Pin MSDS Number: FAS-03-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 7 is observable as an x-ray change. No physical impairment of lung function has been linked to siderosis. Manganese (Mn): Mn intoxication is usually due to the oxide or salts of Mn; elemental Mn exhibits very low toxicity. The dusts and fumes can act as minor irritants to the eyes and respiratory tract.
Stainless Steel Quilting Pin Safety Data Sheet Page 6 of 7 MSDS Number: FAS-03-SP Revision Date: 5-25-16 considered to be in the nuisance dust category. Silicon (Si): Silicon may produce x-ray changes in the lungs. There has been no known disability reported from the x-ray changes. Tungsten (W): There has been some reported evidence of pulmonary involvement such as a cough.
Stainless Steel Quilting Pin MSDS Number: FAS-03-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 7 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Stainless Steel Tag MSDS Number: PAT-21-SP Revision Date: 5-25-16 Safety Data Sheet Page 1 of 8 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Stainless Steel Tag Common Name(s): Stainless Steel Products (Types 304 and 316) EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Stainless Steel Tag MSDS Number: PAT-21-SP Revision Date: 5-25-16 Safety Data Sheet Page 2 of 8 4. FIRST AID MEASURES Eye Contact: flush eyes with plenty of water for at least 15 minutes. Seek medical attention if eye irritation persists. Skin Contact: maintain good personal hygiene. Wash affected area with mild soap and water. Seek medical attention if skin irritation persists. Inhalation: remove to fresh air. Check for clear airway, breathing and presence of pulse. If necessary, administer CPR.
Stainless Steel Tag Safety Data Sheet Page 3 of 8 MSDS Number: PAT-21-SP Revision Date: 5-25-16 up personnel should be protected against contact with eyes and skin protection. Environmental Precautions: Not applicable to stainless steel in solid state. Methods And Materials For Containment And Cleaning Up: Not applicable to stainless steel in solid state. For spills involving fine dusts, remove by vacuuming or wet sweeping methods to prevent spreading of dust. Avoid inhalation of dusts. 7.
Stainless Steel Tag Safety Data Sheet Page 4 of 8 MSDS Number: PAT-21-SP Revision Date: 5-25-16 Governmental Industrial Hygienists (ACGIH 2011) are 8-hour Time Weighted Average concentrations unless otherwise noted. Appropriate Engineering Controls: Provide general or local exhaust to minimize airborne concentrations during milling, grinding, melting and welding operations.
Stainless Steel Tag MSDS Number: PAT-21-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 8 Other Information: Not Applicable 10. STABILITY AND REACTIVITY Reactivity: Not determined for product in solid form. Chemical Stability: Yes. Steel products are stable under normal storage and handling conditions. Possibility Of Hazardous Reactions: Hazardous polymerization cannot occur. Conditions To Avoid: Contact with mineral acids will release flammable hydrogen gas. Dust formation.
Stainless Steel Tag Safety Data Sheet Page 6 of 8 MSDS Number: PAT-21-SP Revision Date: 5-25-16 STOT (Single Exposure): No data. STOT (Repeated Exposures): Respiratory system. Allergic skin reactions.
Stainless Steel Tag MSDS Number: PAT-21-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 8 72 hr. 0.18 mg/l Persistence And Degradability: No data available. Bioaccumulative Potential: No data available. Mobility In Soil: No data available for stainless steel in its natural solid state. Individual metal dusts may migrate into soil and groundwater and be absorbed by plants. Other Adverse Effects: None known. 13.
Stainless Steel Tag MSDS Number: PAT-21-SP Revision Date: 5-25-16 Safety Data Sheet Page 8 of 8 for the components of this material. The default Federal MSDS submission and inventory requirement filing threshold of 10,000 lbs. (4,540 kg) therefore applies, per 40 CFR 370.20. TSCA Inventory Status: The components of this material are listed on the Toxic Substances Control Act Inventory.
Stainless Steel Washer Safety Data Sheet Page 1 of 7 MSDS Number: FAS-07-SP Revision Date: 5-25-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Stainless Steel Washer Common Name(s): Stainless Steel Type 301, 302, 303, 304, 305, 308, 309, 310, 314, 321, 347, 415, F6NM, 1.
Stainless Steel Washer Safety Data Sheet Page 2 of 7 MSDS Number: FAS-07-SP Revision Date: 5-25-16 Cobalt Nonhazardous Ingredients Sizing Iron (Fe) dust fumes (as Iron oxide) C* = Ceiling limit 0.0 to 5.0 0.1 mg/m3 <1 48 to 89 ------------------none established--------------------------------------------none-------------------------10 mg/m3 0.05 mg/m3 5.0 mg/m3 4. FIRST AID MEASURES Inhalation: Move individual to fresh air. Seek medical attention if irritation persists.
Stainless Steel Washer MSDS Number: FAS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 7 Ventilation: General dilution ventilation and/or local exhaust ventilation should be provided, as necessary, to maintain exposures below PEL’s or TLV’s. Adequate ventilation must be provided at elevated temperatures.
Stainless Steel Washer MSDS Number: FAS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 7 Evaporative Rate (Ethyl Ether = 1): N/A Solubility in Water: Not soluble Appearance and Odor: Metallic appearing accessories with no odor. pH: N/A Relative Density: N/A Upper/Lower Flammability or Exposure Limits: N/A Freezing Point: N/A Flash Point: N/A Partition coefficient (n-octanol/water): N/A Auto Ignition Temperature: N/A Decomposition Temperature: N/A Viscosity: N/A 10.
Stainless Steel Washer MSDS Number: FAS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 7 linked to siderosis. Manganese (Mn): Mn intoxication is usually due to the oxide or salts of Mn; elemental Mn exhibits very low toxicity. The dusts and fumes can act as minor irritants to the eyes and respiratory tract. Both acute and chronic exposure may adversely affect the central nervous system (CNS), but symptoms are more likely occur after at least one or two years of prolonged or repeated exposures.
Stainless Steel Washer Safety Data Sheet Page 6 of 7 MSDS Number: FAS-07-SP Revision Date: 5-25-16 Silicon (Si): Silicon may produce x-ray changes in the lungs. There has been no known disability reported from the x-ray changes. Tungsten (W): There has been some reported evidence of pulmonary involvement such as a cough. Molybdenum (Mo): Molybdenum has caused, in animal studies, irritation of the nose and throat, weight loss and digestive disturbances. There have been no reports of industrial poisoning.
Stainless Steel Washer MSDS Number: FAS-07-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 7 Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 1 of 8 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Strain Relief Safety Data Sheet Page 2 of 8 MSDS Number: FAS-75-SP Revision Date: 5-25-16 This product does not contain any components classified as hazardous under the referenced regulation. According to Regulation 1994 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200 CAS Number 32131-17-2 Content (W/W) > 50.0 - < 100.0 % Chemical name polyamide (PA 66) 4. FIRST AID MEASURES Description of first aid measures General advice: Avoid contact with the skin, eyes and clothing.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 3 of 8 Special hazards arising from the substance or mixture Hazards during fire-fighting: Ammonium hydroxide, carbon monoxide, carbon dioxide, cyclopentanone, hydrogen cyanide, amine derivatives, nitriles can be emitted at > 320 °C Under special fire conditions traces of other toxic substances are possible. Formation of further decomposition and oxidation products depends upon the fire conditions.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 4 of 8 deposition of dust. Protect against moisture. Storage stability: Protect against moisture. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Advice on system design: Provide local exhaust ventilation to control dusts/vapours. Personal protective equipment Respiratory protection: Wear respiratory protection if ventilation is inadequate. Wear a NIOSH-certified (or equivalent) particulate respirator.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 5 of 8 determined. Upper explosion limit: The substance / product decomposes therefore not determined. Autoignition: > 400 °C (ASTM D1929) Vapour pressure: not applicable Density: 1.10 - 1.20 g/cm3 ( 20 °C) (EN ISO 1183-1) Relative density: No data available.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 6 of 8 Decomposition products: Hazardous decomposition products: Ammonium hydroxide, carbon monoxide, carbon dioxide, cyclopentanone, hydrogen cyanide, amines, nitriles Thermal decomposition: > 320 °C (TGA) 11. TOXICOLOGICAL INFORMATION Primary routes of exposure Routes of entry for solids and liquids are ingestion and inhalation, but may include eye or skin contact.
Strain Relief MSDS Number: FAS-75-SP Revision Date: 5-25-16 Safety Data Sheet Page 7 of 8 available, no adverse health effects are expected if handled as recommended with suitable precautions for designated uses. Genetic toxicity Assessment of mutagenicity: Based on our experience and the information available, no adverse health effects are expected if handled as recommended with suitable precautions for designated uses.
Strain Relief Safety Data Sheet Page 8 of 8 MSDS Number: FAS-75-SP Revision Date: 5-25-16 13. DISPOSAL CONSIDERATIONS Waste disposal of substance: Check for possible recycling. Incinerate in suitable incineration plant, observing local authority regulations. Container disposal: Packs must be completely emptied. Completely emptied packagings can be given for recycling. 14.
Yellow Natural Kevlar Thread Safety Data Sheet Page 1 of 6 MSDS Number: THRD-14-SP Revision Date: 6-14-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Yellow Natural Kevlar Thread Common Name(s): Woven Textile Product, Aramid Fabric EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Yellow Natural Kevlar Thread MSDS Number: THRD-14-SP Revision Date: 6-14-16 Safety Data Sheet Page 2 of 6 4. FIRST AID MEASURES Inhalation: Move individuals to fresh air. Seek medical attention if irritation persists Skin Contact: Wash with mild soap and running water. Use a washcloth to help remove fibers. To avoid further irritation do not rub or scratch irritated areas. Rubbing or scratching may force fibers into the skin. Seek medical attention if irritation persists.
Yellow Natural Kevlar Thread MSDS Number: THRD-14-SP Revision Date: 6-14-16 Safety Data Sheet Page 3 of 6 handling and processing KEVLAR pulp and filament yarn are typically 0.3 fibrils/CC or less, 8-Hour Time Weighted Average (TWA). The normally low airborne dust levels result from the inherent tendency of KEVLAR fibrils to clump together – they have high surface static charges and their branched shapes readily interlock.
Yellow Natural Kevlar Thread MSDS Number: THRD-14-SP Revision Date: 6-14-16 Safety Data Sheet Page 4 of 6 Polymerizations: Polymerization will not occur Decompositions: Heat generated by laser cutting of fabric of KEVLAR or of laminates containing KEVLAR generates a variety of toxic off gases, some of which may cause irritation of the respiratory tract. 11. TOXICOLOGICAL INFORMATION As shipped, KEVLAR aramid fiber products do not pose a hazard.
Yellow Natural Kevlar Thread MSDS Number: THRD-14-SP Revision Date: 6-14-16 Safety Data Sheet Page 5 of 6 concentrations markedly. Equipment should be vacuumed or wiped instead. Carcinogenicity: None of the components in this material is listed by IARC, NTP, OSHA or ACGIH as a carcinogen. See Animal Data discussed above. Exposure Limits for KEVLAR ARAMIS FIBER – DUPONT AEL* (DuPont): 2 respirable fibers/cc (8-Hr.
Yellow Natural Kevlar Thread MSDS Number: THRD-14-SP Revision Date: 6-14-16 Safety Data Sheet Page 6 of 6 SARA TITLE III: Exempt by definition PA RIGHT-TO-KNOW: Not subject to reporting TSCA INVENTORY: Reported/Included 16.
